Polaris RZR 900 8" Portal Gear Lift ^{GREAT DEAL}

Regular price $ 4,904.90

Vendor: Super ATV DEALER

Category: Drivetrain

Part #: PGH8-1-44-602-B

Availability: Not Stocked, Supplier Confirmation Required

Year

Portal Housing Material

Do you need a frame stiffener?

DESCRIPTION

Available with billet or cast aluminum housing
Cool, quiet, precision ground gears made from 9310 alloy billet steel
1.5 in. diameter 4340 hardened steel drive shaft
Increases width by 4 in. per side (8 in. total)
1.5 in. forward and rear offset
Housings use Thermo-Tork® gaskets and rubber O-rings that don’t let anything through
Universal hub fits all major bolt patterns
Gear reduction reduces stress on your drivetrain

Wheel Requirements:

22" or larger wheel required
Wheels cannot exceed 5" backspacing

Gear Down and Go Big
You like to get wild on your Polaris RZR 900, but are you getting as wild as you could. Take the reins off your ride with SuperATV’s 8” GDP Portal Gear Lift. With 8 inches of extra ground clearance and a torque-boosting 45% or 60% gear reduction, you can do what you think about doing but stop out of fear, and go places nobody else can.

GDP—the Most Trusted Name in Portals
Going big isn’t risky. You’re following in the footsteps of thousands of riders that have chosen GDP before you. More riders roll on GDP portals than any other portal system. They’re out on the trail and parks every day, and with all that ride time, you can bet they’re the most trail-proven portals on the planet.

Perfect for Mud
A big lift plus a 45% gear reduction equals one mud-munchin' monster. With clearance for huge tires and tons of torque to turn them, you’ll cruise over deeper mud and push through anything. Or take it over the top with a 60% gear reduction that lets you turn the biggest tires like stock. GDP and mud are a match made in heaven.

A Gear Reduction That Protects Your Drivetrain
GDP puts the gear reduction in the hub instead of in the transmission. Because it comes after your drivetrain, it reduces stress on your axles, differential, prop shaft, and transmission. So even if you’re riding hard, you’re doing less damage than stock. That means that with GDP, you can keep the pedal down.

Learn more about how tire size and gear reduction can unleash your machine’s potential.

Unmatched Gear Material
The gears in a portal gear lift are pretty important—that’s why ours are top-of-the-line. They’re made from precision-ground 9310 alloy steel so they mate perfectly each and every time. You get quiet portals that run smooth. It’s luxury and performance.

FITMENT

Polaris RZR 900 : 2015-2020
Polaris RZR 900 XC : 2015-2017
Polaris RZR S 900 : 2015-2020
Polaris RZR 4 900 : 2015-2018
Polaris RZR S4 900 : 2018

NOTE: Wheels need to have a center hole of at least 3.25" (82.55mm) or require a 1” wheel spacer.

INCLUDES

Item

DETAILS

Limited Lifetime Warranty

When filling gear box use only 80W-90 gear oil. Using grease will cause failure of gears and bearings. Using grease will void your warranty.

SuperATV takes pride keeping your GDP Portal Gear Lift in working order. That’s why we give you, the original purchaser, a lifetime of portal protection contingent on the following conditions. SuperATV warrants this product and its parts (excluding bearings, seals, & gaskets). Warranty is limited to material and / or workmanship defect at the time of shipment from the factory, and in no event shall seller have any liability for consequential damages of any kind resulting from a breach of this warranty. This warranty will be void on all products that show evidence of misapplication, improper installation, abuse, lack of proper maintenance, negligence, or alteration from original design. This warranty is in lieu of any other warranties, either expressed or implied, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTIBILTY OR FITNESS FOR ANY PARTICULAR PURPOSE.

Procedures for obtaining warranty service:

Should you have any problems with your Gear Driven Performance product, please call SuperATV Customer Service at 855-743-3427. Please have a copy of your original purchase receipt available, with dealer name (if applicable), date of purchase, and invoice number when calling for technical help. Most often, installation, or break in procedural issues (See break in procedure information, located in the instructions) can be handled quickly by speaking with one of our customer service representatives.

If it is determined that repairs are required to your Gear Driven Performance portal, you MUST acquire an RGA number from our customer service team. RGA's and repair services are ONLY rendered by SuperATV. Any shipping costs incurred after 30 days (starting from the original purchase date) on any Portal returned for repair is the customer's responsibility. ALL Portals must be returned in the original box, with the original packaging, or a similarly well protected box. ALL portals must have the RGA number clearly written on the outside of the package. NO COD packages will be accepted, and no package will be accepted without an RGA number written on the outside of the box. Shipping information, including address and method, will be given to you by our customer service team and/or listed on our website when you create your RGA.

Upon arrival of your warranty parts we will have them inspected by our technicians to determine if the damage was a manufacturing defect or rider/installation error. The inspection usually takes place 1-2 days after the package arrives. SuperATV will then call you with the results of the inspection. Depending on the outcome of the inspection, you may be required to pay a replacement fee for the broken parts (prices may vary depending on parts that need to be replaced). We do our best to get your issues corrected as soon as possible so you can get back out on the trails. We also match shipping labels for our customers. If you ship the warranty parts to us with an overnight label, we will return the favor and send you the replacements parts on an overnight shipment at no charge.

If you have product that is outside of warranty coverage or it is determined that product shows evidence of misapplication, improper installation, abuse, lack of proper maintenance, negligence, or alteration from original design. Customer will be notified and we will repair for a $250 fee.

Replacement bearings, seals and gaskets can be found at www.SuperATV.com.

Thank you for your business!