QUESTIONS & ANSWERS
Ask a Question-
Will this bolt kit work for a 2015 Xds Turbo clutch?
Hey Shane, This kit does not work for turbo models. We can build a kit for the turbo setup please email us if interested.
-
On your canam clutch bolt kit, is it just two bolts?
Yes! The cutch bolt kit is two hd bolts, you are to use your factory washers.
-
can you tell me the size of these bolts plz complete dimensions plz
Any specific product information would be listed under the "Includes" tab or "Details" tab of the product page.
-
Hello, will these bolts fit my 2013 can am outlander max 1000 primary and secondary clutch? Are these both reusable non stretch bolts? And would you know the torque specs for your bolts? Thank you
Good morning, yes these will fit your unit! The torque specs can be found on the installation guide! On the product page, click on the "Downloads" tab, then you will see a link to the installation guide.
-
What are the torque specs on these bolts?
We list that information under our "Details" tab on the product page. We will list the specs below. :)
Primary Bolt Install (Longest Bolt)
- Clean crank threads with brake clean make sure all brake clean is evaporated, install bolt with red loctite on the threads, torque to 75 ft lbs best to torque with impact and check with torque wrench. Use the factory OEM washers in the OEM orientation.
Secondary Bolt Install (Shortest Bolt)
- Clean transmission input shaft threads with brake clean make sure all brake clean is evaporated, install bolt with red loctite on the threads, torque to 45 ft lbs best to torque with impact and check with torque wrench. Use the factory OEM washers in the OEM orientation.
-
What is the thread pitch of the primary bolt. Thanks, Scott
Hey Scott, We do not release that info.
-
Is this will fit 2014 can am maverick 1000R
Hello, as long as your Maverick is not the Turbo or the X3, this will fit your unit.
-
I have a 2016 defender hd10. I was about to buy the tools.for opening both clutches then saw this. Does thus rwmobe thw need for the larger tool 708200686that threads into the secondary clutch. If so wouldnt you need that tool to install this bolt?
Hey Shawn, no you still the tool kits. This is a clutch bolt kit that does not fit the Defenders.
-
I see that the fitment tab says: "all mavericks and all years", but have noticed that my 2019 maverick sport DPS 1000r shares many parts, especially the clutch with the X3's? Better safe than sorry, just would like to double verify these bolts will fit my machine. Thanks in advance!
Hi, sorry but this will not work on your unit.
-
Is this m10x110
This contains two bolts - The primary clutch bolt (M12x140) and the ssecondary clutch bolt (M10x110)
-
Is this better than the repair bolt kit that can-am came out with. When I purchase your bolts will they come with detailed instructions and torque specs. Thanks
Our bolt kit replaces the Can-Am OEM bolts to eliminate the common problem of the OEM bolts stretching causing damage to the belt box and your clutch. There is no installation guide but you can find helpful information under the "Details" tab under the product on our website.
-
Are these bolts reusable? Second will they fit a 2015 can am renegade 1000xxc?
yes they are and check fitment tabs always on the website. Yes they will fit.
-
Do you sell the thrust washer for the secondary and the two washers for the primary to go with these bolts?
We do not.
-
Any oem washers are reused when adding these bolts ?
Yes sir correct.
-
Are these bolts single use like the factory bolts?
No sir they are fine to use multiple times.
-
2014 canam commander primary bolt, what is the size and thread count on this bolt? Can I buy the primary bolt only?
The only bolt details we have are listed on the details tab. This kit includes both the primary and secondary bolt and cannot be purchased individually.
-
Will this fit a 2007 outlander 400 primary clutch
Yes sir it will.
-
If I use red locktite on these bolts, how do I remove them if I have to.
They can be removed wiht an impact. No heat needed.
-
Will this primary bolt work on a 2013 xrs with the turbo XDS primary conversion?
Yes sir it will as the crankshaft threads have not changed.
-
Can you confirm this will work on a 2017 commander max? The factory bolt is a stud.
yes sir it will!
-
I orders a kit and want to know the exact torque for your bolt. Do I use locktite red or blue or nine? Same for secondary.
Have a look at our "Details" tab on the product page. We have the primary and secondary bolt install directions listed there. :)
-
I have a can-am maverick 1000r I have to replace the clutch bolt. I don’t want to use the pieces of crap oem stud and bolt. I am wanting to make sure this will work for my model. Can-am 1000r maverick 2014
It sure will :)
-
These are direct replacement on 2016 xmr renegade 1000?i have the studs and want to replace with bolts
They sure are! :) Order in the next 10 minutes or by 3pm CST for same day shipping!
-
Will this work on a 2014 Maverick xrs without modifying anything, (plug and play)?
Correct.
-
Will this work on a 2018 commander xt 1000
Yes it will.
-
Will this fit a 2016 outlander xmr or does that have the stub and nut
You can remove whatever setup is currently on the unit and run this kit.
-
Does this fit a 2018 CANAM Maverick Trail? The secondary bolt about half the size of this.
Hello, here is a link to the kit you will need: https://www.warrantykillerperformance.com/collections/vehicles/products/can-am-maverick-x3-clutch-bolt-kit?_pos=1&_sid=09619f8cc&_ss=r
-
It says to use stock washer in stock placement but on a lot of video’s and in pictures I don’t see people using the black washer. So do I use it or don’t I?
Hey Chris, Please follow our instrutions always on our products or kits regaurdless of what you see else where.
The first washer thats thick is the main support washer, the other washer thats thin is to allow the bolt head less drag druing trq.