- Home
- Can Am "Spartan Series" Clutch Bolt Kit
Can-Am
- Commander - All years & models
- Maverick - All years & models (Except Maverick Turbo and Maverick X3)
- Outlander - All years & models (Except 400-450)
- Renegade - All years & models (Except 400-450)
View similar item(s) for Can-Am Maverick X3 models.
Item
- HD Bolts - QTY 2
Primary Bolt Install
- Clean crank threads with brake clean make sure all brake clean is evaporated, install bolt with red loctite on the threads, torque to 75 ft lbs best to torque with impact and check with torque wrench. Use the factory OEM washers in the OEM orientation.
Note: The primary bolt is longer than the secondary bolt.
Secondary Bolt Install
- Clean transmission input shaft threads with brake clean make sure all brake clean is evaporated, install bolt with red loctite on the threads, torque to 45 ft lbs best to torque with impact and check with torque wrench. Use the factory OEM washers in the OEM orientation.
Note: The secondary bolt is shorter than the primary bolt.
Shipping
- USPS Package: Priority Mail Small Flat Rate Box
- Box Dimensions: 10x6x1
- Weight: 0.5 lbs.
- Reviews
- Questions
Thank you for submitting a review!
Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Perfect replacement
Quality perfect replacement

Awesome
Easy and fixed problem

Great Product!
Installed this kit on a 2017 Can am Maverick 1000R. Worked perfectly. We were able to eliminate the TTY studs for the primary and secondary clutches altogether. Customer is happy and so are we. ---Ridin Dirty Customs LLC

Good product
Smooth as butter

Great upgrade
Great upgrade due to factory bolt failure, highly recommended
QUESTIONS & ANSWERS
Ask a Question-
Will this bolt kit work for a 2015 Xds Turbo clutch?
Hey Shane, This kit does not work for turbo models. We can build a kit for the turbo setup please email us if interested.
-
On your canam clutch bolt kit, is it just two bolts?
Yes! The cutch bolt kit is two hd bolts, you are to use your factory washers.
-
can you tell me the size of these bolts plz complete dimensions plz
Any specific product information would be listed under the "Includes" tab or "Details" tab of the product page.
-
Hello, will these bolts fit my 2013 can am outlander max 1000 primary and secondary clutch? Are these both reusable non stretch bolts? And would you know the torque specs for your bolts? Thank you
Good morning, yes these will fit your unit! The torque specs can be found on the installation guide! On the product page, click on the "Downloads" tab, then you will see a link to the installation guide.
-
What are the torque specs on these bolts?
We list that information under our "Details" tab on the product page. We will list the specs below. :)
Primary Bolt Install (Longest Bolt)
- Clean crank threads with brake clean make sure all brake clean is evaporated, install bolt with red loctite on the threads, torque to 75 ft lbs best to torque with impact and check with torque wrench. Use the factory OEM washers in the OEM orientation.
Secondary Bolt Install (Shortest Bolt)
- Clean transmission input shaft threads with brake clean make sure all brake clean is evaporated, install bolt with red loctite on the threads, torque to 45 ft lbs best to torque with impact and check with torque wrench. Use the factory OEM washers in the OEM orientation.
-
Is this will fit 2014 can am maverick 1000R
Hello, as long as your Maverick is not the Turbo or the X3, this will fit your unit.
-
I see that the fitment tab says: "all mavericks and all years", but have noticed that my 2019 maverick sport DPS 1000r shares many parts, especially the clutch with the X3's? Better safe than sorry, just would like to double verify these bolts will fit my machine. Thanks in advance!
Hi, sorry but this will not work on your unit.
-
Is this m10x110
This contains two bolts - The primary clutch bolt (M12x140) and the ssecondary clutch bolt (M10x110)
-
Is this better than the repair bolt kit that can-am came out with. When I purchase your bolts will they come with detailed instructions and torque specs. Thanks
Our bolt kit replaces the Can-Am OEM bolts to eliminate the common problem of the OEM bolts stretching causing damage to the belt box and your clutch. There is no installation guide but you can find helpful information under the "Details" tab under the product on our website.
-
Are these bolts reusable? Second will they fit a 2015 can am renegade 1000xxc?
yes they are and check fitment tabs always on the website. Yes they will fit.
-
Do you sell the thrust washer for the secondary and the two washers for the primary to go with these bolts?
We do not.
-
Any oem washers are reused when adding these bolts ?
Yes sir correct.
-
Are these bolts single use like the factory bolts?
No sir they are fine to use multiple times.
-
2014 canam commander primary bolt, what is the size and thread count on this bolt? Can I buy the primary bolt only?
The only bolt details we have are listed on the details tab. This kit includes both the primary and secondary bolt and cannot be purchased individually.
-
Will this fit a 2007 outlander 400 primary clutch
Yes sir it will.
-
If I use red locktite on these bolts, how do I remove them if I have to.
They can be removed wiht an impact. No heat needed.
-
Will this primary bolt work on a 2013 xrs with the turbo XDS primary conversion?
Yes sir it will as the crankshaft threads have not changed.
-
Can you confirm this will work on a 2017 commander max? The factory bolt is a stud.
yes sir it will!
-
I orders a kit and want to know the exact torque for your bolt. Do I use locktite red or blue or nine? Same for secondary.
Have a look at our "Details" tab on the product page. We have the primary and secondary bolt install directions listed there. :)
-
I have a can-am maverick 1000r I have to replace the clutch bolt. I don’t want to use the pieces of crap oem stud and bolt. I am wanting to make sure this will work for my model. Can-am 1000r maverick 2014
It sure will :)
-
These are direct replacement on 2016 xmr renegade 1000?i have the studs and want to replace with bolts
They sure are! :) Order in the next 10 minutes or by 3pm CST for same day shipping!
-
Will this work on a 2014 Maverick xrs without modifying anything, (plug and play)?
Correct.
-
Will this work on a 2018 commander xt 1000
Yes it will.
-
Will this fit a 2016 outlander xmr or does that have the stub and nut
You can remove whatever setup is currently on the unit and run this kit.
Related Products
WKP Polaris 900/1000 Crank Seal Upgrade Kit
Usually ships within 24 hours

WKP Polaris 900/1000 Crank Seal Upgrade Kit
New! Anodized black & Laser engraved cover Higher heat & wear properties than OEM seal Preventative maintenance item Can save you costly on repairs OEM and WKP seal can be removed without splitting engine cases WKP seal can be installed without splitting engine cases Cover protects seal from silicone, dirt, dust and debris from belt fa...

WKP Can Am Solid Motor Mounts
Lifetime warranty Proprietary material & dimensions Outperforms OEM and other aftermarket mounts Reduces engine / drivetrain misalignment and wear All marine grade stainless steel hardware Our solid motor mounts are a preventative maintenance item designed to reduce engine movement to zero, unlike the soft OEM rubber mounts. OEM mounts ...
WKP Polaris 800 Crank Seal Upgrade Kit
Usually ships within 24 hours
WKP Polaris 800 Crank Seal Upgrade Kit
WKP seal is higher heat & wear properties than OEM seal Preventative maintenance item Can save you costly on repairs OEM seal can be removed without splitting engine cases WKP seal can be installed without splitting engine cases Cover protects seal from silicone, dirt, dust and debris from belt failure OEM seal prone to failure from silicon...
WKP Can Am GEN 2 Air Box O Ring / Gasket
Replaces OEM foam prone to leaking and failure Can save you costly on engine repairs Water tight seal and fitment Easy and fast installation Our o-ring replaces the factory OEM foam gasket, which is prone to leaking and failure. This provides a tight fit and surface to silicone to guarantee a seal. This product replaces the Can Am OEM gask...

Can Am Aluminum Thermostat Cover Kit
Preventative maintenance item Can save you costly on repairs Factory cover is prone to warping, cracking, and bleed screw thread failure Kit includes thermostat cover, bolt, washer and gasket Made from cast aluminum Improved bleed screw gasket Our thermostat cover is made from cast aluminum for improved strength and heat dissipation. The pl...

Can Am Aluminum Valve Cover Kit
Preventative maintenance item Can save you costly on repairs If oil can leak water and contaminates can get into the engine Factory cover is prone to warping Kit includes valve cover, shoulder bolts and gasket Made from aluminum Our valve cover is made from cast aluminum which will not warp and will add better heat dissipation compared to OE...
WKP Can Am Maverick X3 Beast +4" Brake Pedal
Usually ships within 24 hours

WKP Can Am Maverick X3 Beast +4" Brake Pedal
Performance upgrade item Direct bolt in replacement Larger surface area for your foot Non-slip - aggressive design Comfortable feel Natural race car setup Includes two HD bearings Our brake pedal is a performance upgrade item designed to allow you to "two foot drive" like a race car, unlike the OEM brake pedal. This product is a Warranty Kill...
WKP Polaris 570/900/1000 HD Auto Tensioner
Eliminates the rattling start up noise Eliminates the issue of initial start up timing jump Maintains tension while bike is at extreme angles Uses OEM tensioner unlike other on market Designed specifically for Polaris engines Are you tired of hearing that little rattle when you start up your bike? This is caused by the OEM hydraulic tensioner...
Can Am Wheel Bearing
Lowest cost for comparable products Genuine OEM bearing Rubber coated outside, protects seal from dirt, dust and debris Higher axial and thrust load Greater load distribution Longer bearing life Our wheel bearing is a preventative maintenance item designed to offer a longer bearing life and lower cost compared to buying from Can-Am. This is t...
Can Am Aluminum Stator Cover Plug Kit
Preventative maintenance item Can save you costly on repairs Made from billet aluminum Our stator cover plug is designed to eliminate the factory plastic plug and replace it with our billet aluminum plug. This will eliminate the stripping out of the factory plug and chance of leaking fluids out or water and contaminates entering the engine. ...
Can Am Water Pump Premium Seal Kit
Preventative maintenance item Can save you costly on repairs Includes premium seals Our water pump seal kit is a preventative maintenance item designed to protect the water pump from failure . This kit replaces the Can Am OEM oil seal, part #: 420650315 (Oil Seal) and Can Am OEM rotary seal, part #: 420650370 (Rotary Seal). FITMENT Can-Am ...
WKP Can Am Outlander / Renegade HD Bushing Kit
Usually ships within 24 hours
WKP Can Am Outlander / Renegade HD Bushing Kit
Performance upgrade item Tightens up factory suspension slack No squeaking Works with or without grease Self lubricating material Stronger material and longer lasting Our bushings out perform and outlast all other bushings on the market. These direct OEM replacement bushings offer a snug fit, superior wear protection, weight and noise reduct...