Can Am Outlander Tune
{"id":6542731771969,"title":"WKP \"Spartan Series\" ECU Calibration","handle":"ecu-calibration","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cbr\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003eThe base tune files are the same for all modifications are as stated below then we taylor the calibration for specific modifications listed.\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll torque limits are removed so whatever timing and fuel we calibrate to the unit it will make max power for that calibration and not hit any toque limits short of that under any conditions except if theses conditions reach unsafe values listed below.\u003c\/li\u003e\n\u003cli\u003eAir Intake Temperatures, Coolant Temperatures, Engine Knock, Altitude\u003c\/li\u003e\n\u003cli\u003eAll gears will have full power\u003c\/li\u003e\n\u003cli\u003eDriver demand \/ Toque request maps are linearized for the pedal and throttle body for a more 1:1 feel of pedal travel vs power output.\u003c\/li\u003e\n\u003cli\u003eAll keys will have full power, no limits.\u003c\/li\u003e\n\u003cli\u003eAll speed limiters are removed as well, so the unit will accelerate to top speed until limited by power, gear ratio, or rev limit.\u003c\/li\u003e\n\u003cli\u003eAll speed limiters are removed as well, so the unit will accelerate to top speed until limited by power, gear ratio, or rev limit.\u003c\/li\u003e\n\u003cli\u003eRev Limit is increased to safe amount over stock determined from dyno testing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eFueling is calibrated for max safe power AFR we have determined from testing on the dyno for modifications listed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eTiming is calibrated for max safe power per fuel you are running and modifications listed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eFan temps are lowered to optimal power levels for each unit we have determined from dyno testing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eCold \/ Initial start maps are calibrated for stock or modifications for smooth starting, idle and shifting.\u003c\/li\u003e\n\u003cli\u003eIdle maps are calibrated for smooth shifting. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cspan style=\"color: #ff0000;\"\u003eWe can calibrate any parameters to your special request. Just notate modifications, request and\/or questions. We will not do anything requested past what we know is tested and safe without notifying you of pro’s, con’s and\/or possible unsafe request.\u003c\/span\u003e\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003cp\u003eOur Spartan ECU calibration's commonly referred to in the industry as \"ECU Reflash\" is down to a science not all are the same. We decided to call it what it is a calibration when done properly. WKP does all its testing, tuning and R\u0026amp;D in house on our three dyno system. Engine Dyno for a properly built steady state \u0026amp; variable load tune at the crank, Hub Dyno for checking the tune with the load of the drivetrain at a steady state as well as different load levels with no tire or traction variable. Roller Dyno for final testing with variable load \u0026amp; different diameter tire sizes. This method ensures the most through calibrations on the market the same way the OEM's calibrate the ECU. We do not edit tables to control parameters by tricking the ECU like most \"ECU Reflashes\" on the. market today. All our calibrations will run optimal no matter clutching, tire size, load, altitude or conditions. This is a performance upgrade item designed to enhance your riding experience.\u003cbr\u003e\u003c\/p\u003e\n[TABS]\n\u003ch5\u003eFITMENT\u003c\/h5\u003e\n\u003ch6\u003eCan-Am\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eCommander (All years)\u003c\/li\u003e\n\u003cli\u003eDefender (All years)\u003c\/li\u003e\n\u003cli\u003eMaverick (All years)\u003c\/li\u003e\n\u003cli\u003eMaverick Sport (All years)\u003c\/li\u003e\n\u003cli\u003eMaverick Trail (All years)\u003c\/li\u003e\n\u003cli\u003eMaverick Turbo (All years)\u003c\/li\u003e\n\u003cli\u003eMaverick X3 (All years, \u003cb\u003eexcludes 2021 models\u003c\/b\u003e)\u003c\/li\u003e\n\u003cli\u003eOutlander (All years)\u003c\/li\u003e\n\u003cli\u003eRenegade (All years)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003ePolaris\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eAce (All years)\u003c\/li\u003e\n\u003cli\u003eGeneral (All years)\u003c\/li\u003e\n\u003cli\u003eRanger (All years)\u003c\/li\u003e\n\u003cli\u003eRZR (All years)\u003c\/li\u003e\n\u003cli\u003eScrambler (All years)\u003c\/li\u003e\n\u003cli\u003eSportsman (All years)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eINCLUDES\u003c\/h5\u003e\n\u003ch6\u003eItem\u003c\/h6\u003e\n\u003col\u003e\n\u003cli\u003eECU Calibration - QTY 1\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eDETAILS\u003c\/h5\u003e\n\u003ch6\u003eShipping\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSPS Package:\u003c\/strong\u003e Priority Mail Padded Flat Rate Envelope\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBox Dimensions:\u003c\/strong\u003e 8x8x4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.0 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDOWNLOADS\u003c\/h5\u003e\n\u003ch6\u003eInstructions\u003c\/h6\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/files\/PV3_Installation_Guide.pdf?v=1616703913\" target=\"_blank\"\u003e\u003ci class=\"fa fa-file-pdf-o\"\u003e\u003c\/i\u003eInstallation Guide\u003c\/a\u003e for Power Vision 3 with \u003ca href=\"https:\/\/www.warrantykillerperformance.com\/calibration\"\u003eWKP \"Spartan Series\" ECU Calibration\u003c\/a\u003e\u003c\/p\u003e\n\u003ch6\u003eForms\u003c\/h6\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/files\/WKP_ECU_Calibration_Form.pdf?v=1616428826\" target=\"_blank\"\u003e\u003ci class=\"fa fa-file-pdf-o\"\u003e\u003c\/i\u003eECU Calibration Form\u003c\/a\u003e (PDF)\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.warrantykillerperformance.com\/calibrationform\" target=\"_blank\"\u003e\u003ci class=\"fa fa-file-text-o\"\u003e\u003c\/i\u003eECU Calibration Form\u003c\/a\u003e (Online Form)\u003c\/p\u003e\n[\/TABS]","published_at":"2021-03-22T10:26:17-05:00","created_at":"2021-03-22T09:46:21-05:00","vendor":"Warranty Killer Performance","type":"Tune","tags":["Make_Can-Am","Make_Polaris","Model_Ace","Model_Commander","Model_Commander 1000","Model_Commander 800","Model_Defender","Model_Defender 1000","Model_Defender 800","Model_General","Model_General 1000","Model_Maverick","Model_Maverick Max","Model_Maverick Sport","Model_Maverick Trail","Model_Maverick Turbo","Model_Maverick X3","Model_Maverick XDS","Model_Outlander","Model_Outlander 1000","Model_Outlander 1000 XMR","Model_Outlander 300","Model_Outlander 400","Model_Outlander 450","Model_Outlander 500","Model_Outlander 650","Model_Outlander 800","Model_Outlander Max","Model_Ranger","Model_Ranger 1000","Model_Ranger 1000 HLE","Model_Ranger 1000 XP","Model_Ranger 500","Model_Ranger 570","Model_Ranger 700","Model_Ranger 800","Model_Ranger 900","Model_Ranger 900 HLE","Model_Renegade","Model_Renegade 1000","Model_Renegade 500","Model_Renegade 570","Model_Renegade 800","Model_Renegade 850","Model_Renegade XMR","Model_RZR","Model_RZR 1000","Model_RZR 1000 HLE","Model_RZR 1000 S","Model_RZR 170","Model_RZR 570","Model_RZR 800","Model_RZR 900","Model_Scrambler","Model_Scrambler 1000","Model_Scrambler 850","Model_Sportsman","Model_Sportsman 1000","Model_Sportsman 1000 XP","Model_Sportsman 550","Model_Sportsman 570","Model_Sportsman 800","Model_Sportsman 850","Parts_Tunes","Year_2000","Year_2001","Year_2002","Year_2003","Year_2004","Year_2005","Year_2006","Year_2007","Year_2008","Year_2009","Year_2010","Year_2011","Year_2012","Year_2013","Year_2014","Year_2015","Year_2016","Year_2017","Year_2018","Year_2019","Year_2020","Year_2021"],"price":49999,"price_min":49999,"price_max":49999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39271483539521,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"WKP-SEC","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"WKP \"Spartan Series\" ECU Calibration","public_title":null,"options":["Default Title"],"price":49999,"weight":9072,"compare_at_price":null,"inventory_quantity":94,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/WKPECUCalibration.jpg?v=1616427438"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/WKPECUCalibration.jpg?v=1616427438","options":["Title"],"media":[{"alt":null,"id":20314029850689,"position":1,"preview_image":{"aspect_ratio":1.333,"height":768,"width":1024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/WKPECUCalibration.jpg?v=1616427438"},"aspect_ratio":1.333,"height":768,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/WKPECUCalibration.jpg?v=1616427438","width":1024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e \u003c\/p\u003e\n\u003cbr\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003eThe base tune files are the same for all modifications are as stated below then we taylor the calibration for specific modifications listed.\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll torque limits are removed so whatever timing and fuel we calibrate to the unit it will make max power for that calibration and not hit any toque limits short of that under any conditions except if theses conditions reach unsafe values listed below.\u003c\/li\u003e\n\u003cli\u003eAir Intake Temperatures, Coolant Temperatures, Engine Knock, Altitude\u003c\/li\u003e\n\u003cli\u003eAll gears will have full power\u003c\/li\u003e\n\u003cli\u003eDriver demand \/ Toque request maps are linearized for the pedal and throttle body for a more 1:1 feel of pedal travel vs power output.\u003c\/li\u003e\n\u003cli\u003eAll keys will have full power, no limits.\u003c\/li\u003e\n\u003cli\u003eAll speed limiters are removed as well, so the unit will accelerate to top speed until limited by power, gear ratio, or rev limit.\u003c\/li\u003e\n\u003cli\u003eAll speed limiters are removed as well, so the unit will accelerate to top speed until limited by power, gear ratio, or rev limit.\u003c\/li\u003e\n\u003cli\u003eRev Limit is increased to safe amount over stock determined from dyno testing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eFueling is calibrated for max safe power AFR we have determined from testing on the dyno for modifications listed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eTiming is calibrated for max safe power per fuel you are running and modifications listed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eFan temps are lowered to optimal power levels for each unit we have determined from dyno testing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003eCold \/ Initial start maps are calibrated for stock or modifications for smooth starting, idle and shifting.\u003c\/li\u003e\n\u003cli\u003eIdle maps are calibrated for smooth shifting. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cspan style=\"color: #ff0000;\"\u003eWe can calibrate any parameters to your special request. Just notate modifications, request and\/or questions. We will not do anything requested past what we know is tested and safe without notifying you of pro’s, con’s and\/or possible unsafe request.\u003c\/span\u003e\u003c\/p\u003e\n\u003c!-- split --\u003e\n\u003cp\u003eOur Spartan ECU calibration's commonly referred to in the industry as \"ECU Reflash\" is down to a science not all are the same. We decided to call it what it is a calibration when done properly. WKP does all its testing, tuning and R\u0026amp;D in house on our three dyno system. Engine Dyno for a properly built steady state \u0026amp; variable load tune at the crank, Hub Dyno for checking the tune with the load of the drivetrain at a steady state as well as different load levels with no tire or traction variable. Roller Dyno for final testing with variable load \u0026amp; different diameter tire sizes. This method ensures the most through calibrations on the market the same way the OEM's calibrate the ECU. We do not edit tables to control parameters by tricking the ECU like most \"ECU Reflashes\" on the. market today. All our calibrations will run optimal no matter clutching, tire size, load, altitude or conditions. This is a performance upgrade item designed to enhance your riding experience.\u003cbr\u003e\u003c\/p\u003e\n[TABS]\n\u003ch5\u003eFITMENT\u003c\/h5\u003e\n\u003ch6\u003eCan-Am\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eCommander (All years)\u003c\/li\u003e\n\u003cli\u003eDefender (All years)\u003c\/li\u003e\n\u003cli\u003eMaverick (All years)\u003c\/li\u003e\n\u003cli\u003eMaverick Sport (All years)\u003c\/li\u003e\n\u003cli\u003eMaverick Trail (All years)\u003c\/li\u003e\n\u003cli\u003eMaverick Turbo (All years)\u003c\/li\u003e\n\u003cli\u003eMaverick X3 (All years, \u003cb\u003eexcludes 2021 models\u003c\/b\u003e)\u003c\/li\u003e\n\u003cli\u003eOutlander (All years)\u003c\/li\u003e\n\u003cli\u003eRenegade (All years)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003ePolaris\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eAce (All years)\u003c\/li\u003e\n\u003cli\u003eGeneral (All years)\u003c\/li\u003e\n\u003cli\u003eRanger (All years)\u003c\/li\u003e\n\u003cli\u003eRZR (All years)\u003c\/li\u003e\n\u003cli\u003eScrambler (All years)\u003c\/li\u003e\n\u003cli\u003eSportsman (All years)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eINCLUDES\u003c\/h5\u003e\n\u003ch6\u003eItem\u003c\/h6\u003e\n\u003col\u003e\n\u003cli\u003eECU Calibration - QTY 1\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eDETAILS\u003c\/h5\u003e\n\u003ch6\u003eShipping\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSPS Package:\u003c\/strong\u003e Priority Mail Padded Flat Rate Envelope\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBox Dimensions:\u003c\/strong\u003e 8x8x4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.0 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDOWNLOADS\u003c\/h5\u003e\n\u003ch6\u003eInstructions\u003c\/h6\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/files\/PV3_Installation_Guide.pdf?v=1616703913\" target=\"_blank\"\u003e\u003ci class=\"fa fa-file-pdf-o\"\u003e\u003c\/i\u003eInstallation Guide\u003c\/a\u003e for Power Vision 3 with \u003ca href=\"https:\/\/www.warrantykillerperformance.com\/calibration\"\u003eWKP \"Spartan Series\" ECU Calibration\u003c\/a\u003e\u003c\/p\u003e\n\u003ch6\u003eForms\u003c\/h6\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/files\/WKP_ECU_Calibration_Form.pdf?v=1616428826\" target=\"_blank\"\u003e\u003ci class=\"fa fa-file-pdf-o\"\u003e\u003c\/i\u003eECU Calibration Form\u003c\/a\u003e (PDF)\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.warrantykillerperformance.com\/calibrationform\" target=\"_blank\"\u003e\u003ci class=\"fa fa-file-text-o\"\u003e\u003c\/i\u003eECU Calibration Form\u003c\/a\u003e (Online Form)\u003c\/p\u003e\n[\/TABS]"}
WKP "Spartan Series" ECU Calibration
WKP-SEC
$ 499.99
The base tune files are the same for all modifications are as stated below then we taylor the calibration for specific modifications listed. All torque limits are removed so whatever timing and fuel we calibrate to the unit it will make max power for that calibration and not hit any toque limits short of that under any conditions except if t...
{"id":10363780493,"title":"Power Commander V for Can-Am Outlander \u0026 Renegade 850 \/ 1000 (Fuel \u0026 Ignition)","handle":"power-commander-v-for-can-am-outlander-renegade-850-1000-fuel-ignition","description":"\u003cul\u003e\n\u003cli\u003eCompact design for discrete placement \u0026amp; easy uninstallation to revert to stock settings\u003c\/li\u003e\n\u003cli\u003eVast library of tunes for any combination of aftermarket parts\u003c\/li\u003e\n\u003cli\u003eEasily change \u0026amp; upgrade tunes as you upgrade parts\u003c\/li\u003e\n\u003cli\u003eComes with Power Core software that connects dyno runs with fuel tuners to unlock your ride’s potential\u003c\/li\u003e\n\u003cli\u003eUpgradeable with additional features such as auto-tune and launch control (included on fuel and ignition models, available through the ignition module accessory on all other models)\u003c\/li\u003e\n\u003cli\u003eAnalog input which allows you to install any 0-5 volt sensor and build an adjustment table based on its input such as boost or temperature\u003c\/li\u003e\n\u003cli\u003eEasily connects to your computer via USB\u003c\/li\u003e\n\u003cli\u003eEach cylinder can be mapped individually and for each gear, giving riders more granular control\u003c\/li\u003e\n\u003cli\u003eOne year warranty\u003c\/li\u003e\n\u003cli\u003eProudly made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e \u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eOur Power Commander V fuel tuner optimizes your ride anywhere you’ll roam. This sleek module seamlessly optimizes your air\/fuel ratio without directly changing the ECU, making it effortless to push it to the max. Easily uninstall to revert back to factory default settings when you feel like giving everyone else a chance. Power Commander V takes the guesswork out of pairing efficiency with performance, keeping your focus where it belongs — on the journey ahead. \u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003eBetter than ever (and smaller than ever), Power Commander V now has a fuel change range of -100\/+250%, automatically giving you the best mix of performance and fuel efficiency at all times. This fuel tuner holds two maps at a time for multiple drive options (via the Power Commander V map switch accessory), as well as 10 throttle position columns, so you won’t sacrifice comfort for performance. Featuring a plug-and-play kit, Power Commander V can be installed discreetly underneath your seat, ensuring your ride looks as good as it runs.\n\u003cp\u003e \u003c\/p\u003e\n[TABS]\n\u003ch5\u003eFITMENT\u003c\/h5\u003e\n\u003ch6\u003eCan-Am\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eOutlander 850 (2016-2021)\u003c\/li\u003e\n\u003cli\u003eOutlander 1000 (2016-2021)\u003c\/li\u003e\n\u003cli\u003eRenegade 850 (2016-2020)\u003c\/li\u003e\n\u003cli\u003eRenegade 1000 (2016-2018)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch6\u003eNOTES\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eDual channel Auto tune system allows each cylinder to be mapped separately\u003c\/li\u003e\n\u003cli\u003eNot compatible with Drive By Wire throttle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"alert\"\u003e\n\u003cspan style=\"color: #000;\"\u003e\u003ci class=\"fa fa-exclamation-triangle\"\u003e\u003c\/i\u003e\u003c\/span\u003e \u003cstrong\u003eDISCLAIMER!\u003c\/strong\u003e Not legal for sale or use in California\u003c\/div\u003e\n\u003ch5\u003eINCLUDES\u003c\/h5\u003e\n\u003ch6\u003eItem\u003c\/h6\u003e\n\u003col\u003e\n\u003cli\u003ePower Commander V - QTY 1\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eDETAILS\u003c\/h5\u003e\n\u003ch6\u003eShipping\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSPS Package:\u003c\/strong\u003e Priority Mail Padded Flat Rate Envelope\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBox Dimensions:\u003c\/strong\u003e 8x8x4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.5 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDOWNLOADS\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.dynojet.com\/amfile\/file\/download\/file\/5\/product\/3521\/\" target=\"_blank\"\u003e\u003ci class=\"fa fa-file-pdf-o\"\u003e\u003c\/i\u003ePower Commander V User Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.dynojet.com\/amfile\/file\/download\/file\/6\/product\/3521\/\" target=\"_blank\"\u003e\u003ci class=\"fa fa-file-pdf-o\"\u003e\u003c\/i\u003ePower Commander V Software\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.dynojet.com\/amfile\/file\/download\/file\/7\/product\/3521\/\" target=\"_blank\"\u003e\u003ci class=\"fa fa-file-pdf-o\"\u003e\u003c\/i\u003ePower Commander V Firmware - Version 1.14.2 (Power Core)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.dynojet.com\/amfile\/file\/download\/file\/3819\/product\/3521\/\" target=\"_blank\"\u003e\u003ci class=\"fa fa-file-pdf-o\"\u003e\u003c\/i\u003eInstallation Guide - Power Commander V for Can-Am Outlander \u0026amp; Renegade 850 \/ 1000 (Fuel \u0026amp; Ignition)\u003c\/a\u003e\u003c\/p\u003e\n\u003ch6\u003eMedia\u003c\/h6\u003e\n\u003cp\u003e\u003ci class=\"fa fa-file-photo-o\"\u003e\u003c\/i\u003eNo Media Exists\u003c\/p\u003e\n[\/TABS]","published_at":"2017-06-29T10:01:22-05:00","created_at":"2017-06-29T10:31:02-05:00","vendor":"Dynojet Research","type":"Tune","tags":["Make_Can-Am","Model_Outlander","Model_Outlander 1000","Model_Outlander 850","Model_Renegade","Model_Renegade 1000","Model_Renegade 850","Not For Cali","Parts_Fuel Controllers","Parts_Tunes","Year_2016","Year_2017","Year_2018","Year_2019","Year_2020","Year_2021"],"price":41999,"price_min":41999,"price_max":41999,"available":true,"price_varies":false,"compare_at_price":39999,"compare_at_price_min":39999,"compare_at_price_max":39999,"compare_at_price_varies":false,"variants":[{"id":39383379411009,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"25-030","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Power Commander V for Can-Am Outlander \u0026 Renegade 850 \/ 1000 (Fuel \u0026 Ignition)","public_title":null,"options":["Default Title"],"price":41999,"weight":9072,"compare_at_price":39999,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/DynoJetPowerCommanderV_9985eac9-1cdb-4dcf-acbe-a64ce378bde5.jpg?v=1626886695"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/DynoJetPowerCommanderV_9985eac9-1cdb-4dcf-acbe-a64ce378bde5.jpg?v=1626886695","options":["Title"],"media":[{"alt":null,"id":20662482829377,"position":1,"preview_image":{"aspect_ratio":1.332,"height":476,"width":634,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/DynoJetPowerCommanderV_9985eac9-1cdb-4dcf-acbe-a64ce378bde5.jpg?v=1626886695"},"aspect_ratio":1.332,"height":476,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/DynoJetPowerCommanderV_9985eac9-1cdb-4dcf-acbe-a64ce378bde5.jpg?v=1626886695","width":634}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul\u003e\n\u003cli\u003eCompact design for discrete placement \u0026amp; easy uninstallation to revert to stock settings\u003c\/li\u003e\n\u003cli\u003eVast library of tunes for any combination of aftermarket parts\u003c\/li\u003e\n\u003cli\u003eEasily change \u0026amp; upgrade tunes as you upgrade parts\u003c\/li\u003e\n\u003cli\u003eComes with Power Core software that connects dyno runs with fuel tuners to unlock your ride’s potential\u003c\/li\u003e\n\u003cli\u003eUpgradeable with additional features such as auto-tune and launch control (included on fuel and ignition models, available through the ignition module accessory on all other models)\u003c\/li\u003e\n\u003cli\u003eAnalog input which allows you to install any 0-5 volt sensor and build an adjustment table based on its input such as boost or temperature\u003c\/li\u003e\n\u003cli\u003eEasily connects to your computer via USB\u003c\/li\u003e\n\u003cli\u003eEach cylinder can be mapped individually and for each gear, giving riders more granular control\u003c\/li\u003e\n\u003cli\u003eOne year warranty\u003c\/li\u003e\n\u003cli\u003eProudly made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e \u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eOur Power Commander V fuel tuner optimizes your ride anywhere you’ll roam. This sleek module seamlessly optimizes your air\/fuel ratio without directly changing the ECU, making it effortless to push it to the max. Easily uninstall to revert back to factory default settings when you feel like giving everyone else a chance. Power Commander V takes the guesswork out of pairing efficiency with performance, keeping your focus where it belongs — on the journey ahead. \u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003eBetter than ever (and smaller than ever), Power Commander V now has a fuel change range of -100\/+250%, automatically giving you the best mix of performance and fuel efficiency at all times. This fuel tuner holds two maps at a time for multiple drive options (via the Power Commander V map switch accessory), as well as 10 throttle position columns, so you won’t sacrifice comfort for performance. Featuring a plug-and-play kit, Power Commander V can be installed discreetly underneath your seat, ensuring your ride looks as good as it runs.\n\u003cp\u003e \u003c\/p\u003e\n[TABS]\n\u003ch5\u003eFITMENT\u003c\/h5\u003e\n\u003ch6\u003eCan-Am\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eOutlander 850 (2016-2021)\u003c\/li\u003e\n\u003cli\u003eOutlander 1000 (2016-2021)\u003c\/li\u003e\n\u003cli\u003eRenegade 850 (2016-2020)\u003c\/li\u003e\n\u003cli\u003eRenegade 1000 (2016-2018)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch6\u003eNOTES\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eDual channel Auto tune system allows each cylinder to be mapped separately\u003c\/li\u003e\n\u003cli\u003eNot compatible with Drive By Wire throttle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"alert\"\u003e\n\u003cspan style=\"color: #000;\"\u003e\u003ci class=\"fa fa-exclamation-triangle\"\u003e\u003c\/i\u003e\u003c\/span\u003e \u003cstrong\u003eDISCLAIMER!\u003c\/strong\u003e Not legal for sale or use in California\u003c\/div\u003e\n\u003ch5\u003eINCLUDES\u003c\/h5\u003e\n\u003ch6\u003eItem\u003c\/h6\u003e\n\u003col\u003e\n\u003cli\u003ePower Commander V - QTY 1\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eDETAILS\u003c\/h5\u003e\n\u003ch6\u003eShipping\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSPS Package:\u003c\/strong\u003e Priority Mail Padded Flat Rate Envelope\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBox Dimensions:\u003c\/strong\u003e 8x8x4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.5 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDOWNLOADS\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.dynojet.com\/amfile\/file\/download\/file\/5\/product\/3521\/\" target=\"_blank\"\u003e\u003ci class=\"fa fa-file-pdf-o\"\u003e\u003c\/i\u003ePower Commander V User Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.dynojet.com\/amfile\/file\/download\/file\/6\/product\/3521\/\" target=\"_blank\"\u003e\u003ci class=\"fa fa-file-pdf-o\"\u003e\u003c\/i\u003ePower Commander V Software\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.dynojet.com\/amfile\/file\/download\/file\/7\/product\/3521\/\" target=\"_blank\"\u003e\u003ci class=\"fa fa-file-pdf-o\"\u003e\u003c\/i\u003ePower Commander V Firmware - Version 1.14.2 (Power Core)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.dynojet.com\/amfile\/file\/download\/file\/3819\/product\/3521\/\" target=\"_blank\"\u003e\u003ci class=\"fa fa-file-pdf-o\"\u003e\u003c\/i\u003eInstallation Guide - Power Commander V for Can-Am Outlander \u0026amp; Renegade 850 \/ 1000 (Fuel \u0026amp; Ignition)\u003c\/a\u003e\u003c\/p\u003e\n\u003ch6\u003eMedia\u003c\/h6\u003e\n\u003cp\u003e\u003ci class=\"fa fa-file-photo-o\"\u003e\u003c\/i\u003eNo Media Exists\u003c\/p\u003e\n[\/TABS]"}
Power Commander V for Can-Am Outlander & Renegade 850 / 1000 (Fuel & Ignition)
25-030
$ 419.99
Compact design for discrete placement & easy uninstallation to revert to stock settings Vast library of tunes for any combination of aftermarket parts Easily change & upgrade tunes as you upgrade parts Comes with Power Core software that connects dyno runs with fuel tuners to unlock your ride’s potential Upgradeable with additional feat...
{"id":6578109841473,"title":"Power Commander V for Can-Am Outlander 450","handle":"power-commander-v-for-can-am-outlander-450","description":"\u003cul\u003e\n\u003cli\u003eCompact design for discrete placement \u0026amp; easy uninstallation to revert to stock settings\u003c\/li\u003e\n\u003cli\u003eVast library of tunes for any combination of aftermarket parts\u003c\/li\u003e\n\u003cli\u003eEasily change \u0026amp; upgrade tunes as you upgrade parts\u003c\/li\u003e\n\u003cli\u003eComes with Power Core software that connects dyno runs with fuel tuners to unlock your ride’s potential\u003c\/li\u003e\n\u003cli\u003eUpgradeable with additional features such as auto-tune and launch control (included on fuel and ignition models, available through the ignition module accessory on all other models)\u003c\/li\u003e\n\u003cli\u003eAnalog input which allows you to install any 0-5 volt sensor and build an adjustment table based on its input such as boost or temperature\u003c\/li\u003e\n\u003cli\u003eEasily connects to your computer via USB\u003c\/li\u003e\n\u003cli\u003eEach cylinder can be mapped individually and for each gear, giving riders more granular control\u003c\/li\u003e\n\u003cli\u003eOne year warranty\u003c\/li\u003e\n\u003cli\u003eProudly made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e \u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eOur Power Commander V fuel tuner optimizes your ride anywhere you’ll roam. This sleek module seamlessly optimizes your air\/fuel ratio without directly changing the ECU, making it effortless to push it to the max. Easily uninstall to revert back to factory default settings when you feel like giving everyone else a chance. Power Commander V takes the guesswork out of pairing efficiency with performance, keeping your focus where it belongs — on the journey ahead. \u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003eBetter than ever (and smaller than ever), Power Commander V now has a fuel change range of -100\/+250%, automatically giving you the best mix of performance and fuel efficiency at all times. This fuel tuner holds two maps at a time for multiple drive options (via the Power Commander V map switch accessory), as well as 10 throttle position columns, so you won’t sacrifice comfort for performance. Featuring a plug-and-play kit, Power Commander V can be installed discreetly underneath your seat, ensuring your ride looks as good as it runs.\n\u003cp\u003e \u003c\/p\u003e\n[TABS]\n\u003ch5\u003eFITMENT\u003c\/h5\u003e\n\u003ch6\u003eCan-Am\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eOutlander 450 (2014-2020)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eINCLUDES\u003c\/h5\u003e\n\u003ch6\u003eItem\u003c\/h6\u003e\n\u003col\u003e\n\u003cli\u003ePower Commander V - QTY 1\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eDETAILS\u003c\/h5\u003e\n\u003ch6\u003eShipping\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSPS Package:\u003c\/strong\u003e Priority Mail Padded Flat Rate Envelope\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBox Dimensions:\u003c\/strong\u003e 8x8x4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.5 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDOWNLOADS\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.dynojet.com\/amfile\/file\/download\/file\/5\/product\/3516\/\" target=\"_blank\"\u003e\u003ci class=\"fa fa-file-pdf-o\"\u003e\u003c\/i\u003ePower Commander V User Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.dynojet.com\/amfile\/file\/download\/file\/6\/product\/3516\/\" target=\"_blank\"\u003e\u003ci class=\"fa fa-file-pdf-o\"\u003e\u003c\/i\u003ePower Commander V Software\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.dynojet.com\/amfile\/file\/download\/file\/7\/product\/3516\/\" target=\"_blank\"\u003e\u003ci class=\"fa fa-file-pdf-o\"\u003e\u003c\/i\u003ePower Commander V Firmware - Version 1.14.2 (Power Core)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.dynojet.com\/amfile\/file\/download\/file\/3804\/product\/3516\/\" target=\"_blank\"\u003e\u003ci class=\"fa fa-file-pdf-o\"\u003e\u003c\/i\u003eInstallation Guide - Power Commander V for Can-Am Outlander 450\u003c\/a\u003e\u003c\/p\u003e\n\u003ch6\u003eMedia\u003c\/h6\u003e\n\u003cp\u003e\u003ci class=\"fa fa-file-photo-o\"\u003e\u003c\/i\u003eNo Media Exists\u003c\/p\u003e\n[\/TABS]","published_at":"2021-07-23T15:30:05-05:00","created_at":"2021-07-23T15:27:55-05:00","vendor":"Dynojet Research","type":"Tune","tags":["Make_Can-Am","Model_Outlander","Model_Outlander 450","Parts_Fuel Controllers","Parts_Tunes","Year_2014","Year_2015","Year_2016","Year_2017","Year_2018","Year_2019","Year_2020"],"price":39999,"price_min":39999,"price_max":39999,"available":true,"price_varies":false,"compare_at_price":34999,"compare_at_price_min":34999,"compare_at_price_max":34999,"compare_at_price_varies":false,"variants":[{"id":39385561071681,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"25-025","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Power Commander V for Can-Am Outlander 450","public_title":null,"options":["Default Title"],"price":39999,"weight":2268,"compare_at_price":34999,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/PowerCommanderVModule_13ec0267-b9bd-4d04-ad6a-3d94e4be4f03.jpg?v=1627072076"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/PowerCommanderVModule_13ec0267-b9bd-4d04-ad6a-3d94e4be4f03.jpg?v=1627072076","options":["Title"],"media":[{"alt":null,"id":20667646050369,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/PowerCommanderVModule_13ec0267-b9bd-4d04-ad6a-3d94e4be4f03.jpg?v=1627072076"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/PowerCommanderVModule_13ec0267-b9bd-4d04-ad6a-3d94e4be4f03.jpg?v=1627072076","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul\u003e\n\u003cli\u003eCompact design for discrete placement \u0026amp; easy uninstallation to revert to stock settings\u003c\/li\u003e\n\u003cli\u003eVast library of tunes for any combination of aftermarket parts\u003c\/li\u003e\n\u003cli\u003eEasily change \u0026amp; upgrade tunes as you upgrade parts\u003c\/li\u003e\n\u003cli\u003eComes with Power Core software that connects dyno runs with fuel tuners to unlock your ride’s potential\u003c\/li\u003e\n\u003cli\u003eUpgradeable with additional features such as auto-tune and launch control (included on fuel and ignition models, available through the ignition module accessory on all other models)\u003c\/li\u003e\n\u003cli\u003eAnalog input which allows you to install any 0-5 volt sensor and build an adjustment table based on its input such as boost or temperature\u003c\/li\u003e\n\u003cli\u003eEasily connects to your computer via USB\u003c\/li\u003e\n\u003cli\u003eEach cylinder can be mapped individually and for each gear, giving riders more granular control\u003c\/li\u003e\n\u003cli\u003eOne year warranty\u003c\/li\u003e\n\u003cli\u003eProudly made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e \u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eOur Power Commander V fuel tuner optimizes your ride anywhere you’ll roam. This sleek module seamlessly optimizes your air\/fuel ratio without directly changing the ECU, making it effortless to push it to the max. Easily uninstall to revert back to factory default settings when you feel like giving everyone else a chance. Power Commander V takes the guesswork out of pairing efficiency with performance, keeping your focus where it belongs — on the journey ahead. \u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003eBetter than ever (and smaller than ever), Power Commander V now has a fuel change range of -100\/+250%, automatically giving you the best mix of performance and fuel efficiency at all times. This fuel tuner holds two maps at a time for multiple drive options (via the Power Commander V map switch accessory), as well as 10 throttle position columns, so you won’t sacrifice comfort for performance. Featuring a plug-and-play kit, Power Commander V can be installed discreetly underneath your seat, ensuring your ride looks as good as it runs.\n\u003cp\u003e \u003c\/p\u003e\n[TABS]\n\u003ch5\u003eFITMENT\u003c\/h5\u003e\n\u003ch6\u003eCan-Am\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eOutlander 450 (2014-2020)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eINCLUDES\u003c\/h5\u003e\n\u003ch6\u003eItem\u003c\/h6\u003e\n\u003col\u003e\n\u003cli\u003ePower Commander V - QTY 1\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eDETAILS\u003c\/h5\u003e\n\u003ch6\u003eShipping\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSPS Package:\u003c\/strong\u003e Priority Mail Padded Flat Rate Envelope\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBox Dimensions:\u003c\/strong\u003e 8x8x4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.5 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDOWNLOADS\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.dynojet.com\/amfile\/file\/download\/file\/5\/product\/3516\/\" target=\"_blank\"\u003e\u003ci class=\"fa fa-file-pdf-o\"\u003e\u003c\/i\u003ePower Commander V User Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.dynojet.com\/amfile\/file\/download\/file\/6\/product\/3516\/\" target=\"_blank\"\u003e\u003ci class=\"fa fa-file-pdf-o\"\u003e\u003c\/i\u003ePower Commander V Software\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.dynojet.com\/amfile\/file\/download\/file\/7\/product\/3516\/\" target=\"_blank\"\u003e\u003ci class=\"fa fa-file-pdf-o\"\u003e\u003c\/i\u003ePower Commander V Firmware - Version 1.14.2 (Power Core)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.dynojet.com\/amfile\/file\/download\/file\/3804\/product\/3516\/\" target=\"_blank\"\u003e\u003ci class=\"fa fa-file-pdf-o\"\u003e\u003c\/i\u003eInstallation Guide - Power Commander V for Can-Am Outlander 450\u003c\/a\u003e\u003c\/p\u003e\n\u003ch6\u003eMedia\u003c\/h6\u003e\n\u003cp\u003e\u003ci class=\"fa fa-file-photo-o\"\u003e\u003c\/i\u003eNo Media Exists\u003c\/p\u003e\n[\/TABS]"}
Power Commander V for Can-Am Outlander 450
25-025
$ 399.99
Compact design for discrete placement & easy uninstallation to revert to stock settings Vast library of tunes for any combination of aftermarket parts Easily change & upgrade tunes as you upgrade parts Comes with Power Core software that connects dyno runs with fuel tuners to unlock your ride’s potential Upgradeable with additional feat...
{"id":6578081857601,"title":"Power Commander V for Can-Am Outlander 400","handle":"power-commander-v-for-can-am-outlander-400","description":"\u003cul\u003e\n\u003cli\u003eCompact design for discrete placement \u0026amp; easy uninstallation to revert to stock settings\u003c\/li\u003e\n\u003cli\u003eVast library of tunes for any combination of aftermarket parts\u003c\/li\u003e\n\u003cli\u003eEasily change \u0026amp; upgrade tunes as you upgrade parts\u003c\/li\u003e\n\u003cli\u003eComes with Power Core software that connects dyno runs with fuel tuners to unlock your ride’s potential\u003c\/li\u003e\n\u003cli\u003eUpgradeable with additional features such as auto-tune and launch control (included on fuel and ignition models, available through the ignition module accessory on all other models)\u003c\/li\u003e\n\u003cli\u003eAnalog input which allows you to install any 0-5 volt sensor and build an adjustment table based on its input such as boost or temperature\u003c\/li\u003e\n\u003cli\u003eEasily connects to your computer via USB\u003c\/li\u003e\n\u003cli\u003eEach cylinder can be mapped individually and for each gear, giving riders more granular control\u003c\/li\u003e\n\u003cli\u003eOne year warranty\u003c\/li\u003e\n\u003cli\u003eProudly made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e \u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eOur Power Commander V fuel tuner optimizes your ride anywhere you’ll roam. This sleek module seamlessly optimizes your air\/fuel ratio without directly changing the ECU, making it effortless to push it to the max. Easily uninstall to revert back to factory default settings when you feel like giving everyone else a chance. Power Commander V takes the guesswork out of pairing efficiency with performance, keeping your focus where it belongs — on the journey ahead. \u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003eBetter than ever (and smaller than ever), Power Commander V now has a fuel change range of -100\/+250%, automatically giving you the best mix of performance and fuel efficiency at all times. This fuel tuner holds two maps at a time for multiple drive options (via the Power Commander V map switch accessory), as well as 10 throttle position columns, so you won’t sacrifice comfort for performance. Featuring a plug-and-play kit, Power Commander V can be installed discreetly underneath your seat, ensuring your ride looks as good as it runs.\n\u003cp\u003e \u003c\/p\u003e\n[TABS]\n\u003ch5\u003eFITMENT\u003c\/h5\u003e\n\u003ch6\u003eCan-Am\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eOutlander 400 (2009-2014)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eINCLUDES\u003c\/h5\u003e\n\u003ch6\u003eItem\u003c\/h6\u003e\n\u003col\u003e\n\u003cli\u003ePower Commander V - QTY 1\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eDETAILS\u003c\/h5\u003e\n\u003ch6\u003eShipping\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSPS Package:\u003c\/strong\u003e Priority Mail Padded Flat Rate Envelope\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBox Dimensions:\u003c\/strong\u003e 8x8x4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.5 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDOWNLOADS\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.dynojet.com\/amfile\/file\/download\/file\/5\/product\/3498\/\" target=\"_blank\"\u003e\u003ci class=\"fa fa-file-pdf-o\"\u003e\u003c\/i\u003ePower Commander V User Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.dynojet.com\/amfile\/file\/download\/file\/6\/product\/3498\/\" target=\"_blank\"\u003e\u003ci class=\"fa fa-file-pdf-o\"\u003e\u003c\/i\u003ePower Commander V Software\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.dynojet.com\/amfile\/file\/download\/file\/7\/product\/3498\/\" target=\"_blank\"\u003e\u003ci class=\"fa fa-file-pdf-o\"\u003e\u003c\/i\u003ePower Commander V Firmware - Version 1.14.2 (Power Core)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.dynojet.com\/amfile\/file\/download\/file\/3750\/product\/3498\/\" target=\"_blank\"\u003e\u003ci class=\"fa fa-file-pdf-o\"\u003e\u003c\/i\u003eInstallation Guide - Power Commander V for Can-Am Outlander 400\u003c\/a\u003e\u003c\/p\u003e\n\u003ch6\u003eMedia\u003c\/h6\u003e\n\u003cp\u003e\u003ci class=\"fa fa-file-photo-o\"\u003e\u003c\/i\u003eNo Media Exists\u003c\/p\u003e\n[\/TABS]","published_at":"2021-07-23T12:56:29-05:00","created_at":"2021-07-23T12:43:22-05:00","vendor":"Dynojet Research","type":"Tune","tags":["Make_Can-Am","Model_Outlander","Model_Outlander 400","Parts_Fuel Controllers","Parts_Tunes","Year_2009","Year_2010","Year_2011","Year_2012","Year_2013","Year_2014"],"price":39999,"price_min":39999,"price_max":39999,"available":true,"price_varies":false,"compare_at_price":34999,"compare_at_price_min":34999,"compare_at_price_max":34999,"compare_at_price_varies":false,"variants":[{"id":39385503039553,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"25-005","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Power Commander V for Can-Am Outlander 400","public_title":null,"options":["Default Title"],"price":39999,"weight":2268,"compare_at_price":34999,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/PowerCommanderVModule.jpg?v=1627062203"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/PowerCommanderVModule.jpg?v=1627062203","options":["Title"],"media":[{"alt":null,"id":20667379941441,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/PowerCommanderVModule.jpg?v=1627062203"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/PowerCommanderVModule.jpg?v=1627062203","width":1200}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul\u003e\n\u003cli\u003eCompact design for discrete placement \u0026amp; easy uninstallation to revert to stock settings\u003c\/li\u003e\n\u003cli\u003eVast library of tunes for any combination of aftermarket parts\u003c\/li\u003e\n\u003cli\u003eEasily change \u0026amp; upgrade tunes as you upgrade parts\u003c\/li\u003e\n\u003cli\u003eComes with Power Core software that connects dyno runs with fuel tuners to unlock your ride’s potential\u003c\/li\u003e\n\u003cli\u003eUpgradeable with additional features such as auto-tune and launch control (included on fuel and ignition models, available through the ignition module accessory on all other models)\u003c\/li\u003e\n\u003cli\u003eAnalog input which allows you to install any 0-5 volt sensor and build an adjustment table based on its input such as boost or temperature\u003c\/li\u003e\n\u003cli\u003eEasily connects to your computer via USB\u003c\/li\u003e\n\u003cli\u003eEach cylinder can be mapped individually and for each gear, giving riders more granular control\u003c\/li\u003e\n\u003cli\u003eOne year warranty\u003c\/li\u003e\n\u003cli\u003eProudly made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e \u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eOur Power Commander V fuel tuner optimizes your ride anywhere you’ll roam. This sleek module seamlessly optimizes your air\/fuel ratio without directly changing the ECU, making it effortless to push it to the max. Easily uninstall to revert back to factory default settings when you feel like giving everyone else a chance. Power Commander V takes the guesswork out of pairing efficiency with performance, keeping your focus where it belongs — on the journey ahead. \u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003eBetter than ever (and smaller than ever), Power Commander V now has a fuel change range of -100\/+250%, automatically giving you the best mix of performance and fuel efficiency at all times. This fuel tuner holds two maps at a time for multiple drive options (via the Power Commander V map switch accessory), as well as 10 throttle position columns, so you won’t sacrifice comfort for performance. Featuring a plug-and-play kit, Power Commander V can be installed discreetly underneath your seat, ensuring your ride looks as good as it runs.\n\u003cp\u003e \u003c\/p\u003e\n[TABS]\n\u003ch5\u003eFITMENT\u003c\/h5\u003e\n\u003ch6\u003eCan-Am\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eOutlander 400 (2009-2014)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eINCLUDES\u003c\/h5\u003e\n\u003ch6\u003eItem\u003c\/h6\u003e\n\u003col\u003e\n\u003cli\u003ePower Commander V - QTY 1\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch5\u003eDETAILS\u003c\/h5\u003e\n\u003ch6\u003eShipping\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSPS Package:\u003c\/strong\u003e Priority Mail Padded Flat Rate Envelope\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBox Dimensions:\u003c\/strong\u003e 8x8x4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.5 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eDOWNLOADS\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.dynojet.com\/amfile\/file\/download\/file\/5\/product\/3498\/\" target=\"_blank\"\u003e\u003ci class=\"fa fa-file-pdf-o\"\u003e\u003c\/i\u003ePower Commander V User Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.dynojet.com\/amfile\/file\/download\/file\/6\/product\/3498\/\" target=\"_blank\"\u003e\u003ci class=\"fa fa-file-pdf-o\"\u003e\u003c\/i\u003ePower Commander V Software\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.dynojet.com\/amfile\/file\/download\/file\/7\/product\/3498\/\" target=\"_blank\"\u003e\u003ci class=\"fa fa-file-pdf-o\"\u003e\u003c\/i\u003ePower Commander V Firmware - Version 1.14.2 (Power Core)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.dynojet.com\/amfile\/file\/download\/file\/3750\/product\/3498\/\" target=\"_blank\"\u003e\u003ci class=\"fa fa-file-pdf-o\"\u003e\u003c\/i\u003eInstallation Guide - Power Commander V for Can-Am Outlander 400\u003c\/a\u003e\u003c\/p\u003e\n\u003ch6\u003eMedia\u003c\/h6\u003e\n\u003cp\u003e\u003ci class=\"fa fa-file-photo-o\"\u003e\u003c\/i\u003eNo Media Exists\u003c\/p\u003e\n[\/TABS]"}
Power Commander V for Can-Am Outlander 400
25-005
$ 399.99
Compact design for discrete placement & easy uninstallation to revert to stock settings Vast library of tunes for any combination of aftermarket parts Easily change & upgrade tunes as you upgrade parts Comes with Power Core software that connects dyno runs with fuel tuners to unlock your ride’s potential Upgradeable with additional feat...
