High Lifter

Sort by:
Filter
Great Deal
2" Lift Kit for Can Am Outlander 650/800
CLK800-00

Suspension

$ 104.95 $ 175.99
{"id":248849137690,"title":"2\" Lift Kit for Can Am Outlander 650\/800","handle":"lift-kit-for-can-am-outlander-650-800","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eRelocate your shock mounts and get the lift need for tighter suspension and larger mud tires! Our High Lifter lift kit consistently measures truer (and higher) than the competition!\u003c\/span\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eBigger. Badder. BOLDER. Take your ATV to the edge with High Lifter’s 2” Lift Kit. Increase your ground clearance and make room for larger tires to dig deep and ride hard in most any terrain. Our engineers and staff have spent over 20 years perfecting the ultimate ATV lift kit. The product? An easy-to-install, bolt-on lift that consistently measures truer over competitor products.\u003c\/p\u003e\n\u003cp\u003eThe High Lifter 2” Lift Kit relocates the shock mounts to provide additional lift making room for larger tires and tightens suspension. Each Lift Kit part is precision cut and zinc plated for durability and reliability in any environment.\u003c\/p\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cp\u003e2” Lift Kit Features: \u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eAll hardware needed for successful installation\u003c\/li\u003e\n\u003cli\u003eUser-friendly instructions \u003c\/li\u003e\n\u003cli\u003eBolt-on application; takes approximately 1-2 hours for install\u003c\/li\u003e\n\u003cli\u003eZinc plated\u003c\/li\u003e\n\u003cli\u003eFront and rear lift\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTire Fitment:\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eCan-Am 650 Outlander - Up to 30\"\u003c\/li\u003e\n\u003cli\u003eCan-Am 800 Outlander - Up to 30\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOur stated tire fitment guide is a general fitment and is in no way guaranteed. Tires and lifts vary by manufacture and tire fitment can be affected by other modifications. Always verify your brand of tires, lift, and other modifications prior to making a buying decision.\u003c\/p\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cp\u003eFits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eCan-Am 650 Outlander (05-09)\u003c\/li\u003e\n\u003cli\u003eCan-Am 800 Outlander (05-09)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/www.highlifter.com\/images\/CLK800-00.pdf\" target=\"_blank\" class=\"button6\" rel=\"noopener noreferrer\"\u003eInstallation Guide\u003c\/a\u003e\u003c\/span\u003e","published_at":"2017-12-27T13:01:14-06:00","created_at":"2017-12-27T13:04:41-06:00","vendor":"High Lifter","type":"Suspension","tags":["Make_Can-Am","Model_Outlander 650","Model_Outlander 800","Parts_Lifts","Year_2005","Year_2006","Year_2007","Year_2008","Year_2009"],"price":10495,"price_min":10495,"price_max":10495,"available":true,"price_varies":false,"compare_at_price":17599,"compare_at_price_min":17599,"compare_at_price_max":17599,"compare_at_price_varies":false,"variants":[{"id":3320286576666,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CLK800-00","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"2\" Lift Kit for Can Am Outlander 650\/800","public_title":null,"options":["Default Title"],"price":10495,"weight":2268,"compare_at_price":17599,"inventory_quantity":-1,"inventory_management":"shopify","inventory_policy":"continue","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/CLK800-00a.jpg?v=1532607737","\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/CLK800-00b.jpg?v=1532607737","\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/CLK800-00c.jpg?v=1532607737","\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/CLK800-00d.jpg?v=1532607737"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/CLK800-00a.jpg?v=1532607737","options":["Title"],"media":[{"alt":"2\" Lift Kit for Can Am Outlander 650\/800 - Warranty Killer Performance","id":560829268033,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/CLK800-00a.jpg?v=1569040645"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/CLK800-00a.jpg?v=1569040645","width":600},{"alt":"2\" Lift Kit for Can Am Outlander 650\/800 - Warranty Killer Performance","id":560829431873,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/CLK800-00b.jpg?v=1569040645"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/CLK800-00b.jpg?v=1569040645","width":600},{"alt":"2\" Lift Kit for Can Am Outlander 650\/800 - Warranty Killer Performance","id":560829497409,"position":3,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/CLK800-00c.jpg?v=1569040645"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/CLK800-00c.jpg?v=1569040645","width":600},{"alt":"2\" Lift Kit for Can Am Outlander 650\/800 - Warranty Killer Performance","id":560829530177,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/CLK800-00d.jpg?v=1569040645"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/CLK800-00d.jpg?v=1569040645","width":600}],"content":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eRelocate your shock mounts and get the lift need for tighter suspension and larger mud tires! Our High Lifter lift kit consistently measures truer (and higher) than the competition!\u003c\/span\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eBigger. Badder. BOLDER. Take your ATV to the edge with High Lifter’s 2” Lift Kit. Increase your ground clearance and make room for larger tires to dig deep and ride hard in most any terrain. Our engineers and staff have spent over 20 years perfecting the ultimate ATV lift kit. The product? An easy-to-install, bolt-on lift that consistently measures truer over competitor products.\u003c\/p\u003e\n\u003cp\u003eThe High Lifter 2” Lift Kit relocates the shock mounts to provide additional lift making room for larger tires and tightens suspension. Each Lift Kit part is precision cut and zinc plated for durability and reliability in any environment.\u003c\/p\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cp\u003e2” Lift Kit Features: \u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eAll hardware needed for successful installation\u003c\/li\u003e\n\u003cli\u003eUser-friendly instructions \u003c\/li\u003e\n\u003cli\u003eBolt-on application; takes approximately 1-2 hours for install\u003c\/li\u003e\n\u003cli\u003eZinc plated\u003c\/li\u003e\n\u003cli\u003eFront and rear lift\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTire Fitment:\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eCan-Am 650 Outlander - Up to 30\"\u003c\/li\u003e\n\u003cli\u003eCan-Am 800 Outlander - Up to 30\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOur stated tire fitment guide is a general fitment and is in no way guaranteed. Tires and lifts vary by manufacture and tire fitment can be affected by other modifications. Always verify your brand of tires, lift, and other modifications prior to making a buying decision.\u003c\/p\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cp\u003eFits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eCan-Am 650 Outlander (05-09)\u003c\/li\u003e\n\u003cli\u003eCan-Am 800 Outlander (05-09)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/www.highlifter.com\/images\/CLK800-00.pdf\" target=\"_blank\" class=\"button6\" rel=\"noopener noreferrer\"\u003eInstallation Guide\u003c\/a\u003e\u003c\/span\u003e"}
2" Lift Kit for Can Am Outlander 650/800 - Warranty Killer Performance

2" Lift Kit for Can Am Outlander 650/800

CLK800-00

$ 104.95 $ 175.99

Relocate your shock mounts and get the lift need for tighter suspension and larger mud tires! Our High Lifter lift kit consistently measures truer (and higher) than the competition! Bigger. Badder. BOLDER. Take your ATV to the edge with High Lifter’s 2” Lift Kit. Increase your ground clearance and make room for larger tires to dig deep and rid...


More Info
{"id":132607442970,"title":"2\" Lift Kit Polaris Scrambler and Sportsman 550\/850\/1000","handle":"2-lift-kit-polaris-scrambler-and-sportsman-550-850-1000","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eRelocate your shock mounts and get the lift need for tighter suspension and larger mud tires! Our lift consistently measures truer (and higher) than the competition!\u003c\/span\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eBigger. Badder. \u003c\/span\u003e\u003cstrong\u003eBOLDER\u003c\/strong\u003e\u003cspan\u003e. Take your ATV to the edge with High Lifter’s 2” Lift Kit.  Increase your ground clearance and make room for larger tires to dig deep and ride hard in most any terrain.  Our engineers and staff have spent over 20 years perfecting the ultimate ATV lift kit. The product?  An easy-to-install, bolt-on lift that \u003c\/span\u003e\u003cstrong\u003e\u003cem\u003econsistently\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e measures truer over competitor products.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe High Lifter 2” Lift Kit relocates the shock mounts to provide additional lift making room for larger tires and tightens suspension.  Each Lift Kit part  is precision cut and zinc plated for durability and reliability in \u003cem\u003eany\u003c\/em\u003e environment.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003e2” Lift Kit Features:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e·         All hardware needed for successful installation\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e·         User-friendly instructions\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e·         Bolt-on application; takes approximately 2.5 hours for install\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e·         Zinc plated\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e·         Front and rear lift\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003e*Rear factory upper a-arm modification is required\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2017-09-29T15:21:31-05:00","created_at":"2017-09-29T15:24:32-05:00","vendor":"High Lifter","type":"Suspension","tags":["Make_Polaris","Model_Scrambler","Model_Sportsman","Model_Sportsman 1000","Model_Sportsman 850","Parts_Lifts","Year_2009","Year_2010","Year_2011","Year_2012","Year_2013","Year_2014","Year_2015","Year_2016","Year_2017","Year_2018"],"price":14499,"price_min":14499,"price_max":14499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":1852127150106,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PLK1SPT-01","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"2\" Lift Kit Polaris Scrambler and Sportsman 550\/850\/1000","public_title":null,"options":["Default Title"],"price":14499,"weight":9072,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/PLK1SPT-01_l.jpg?v=1527190836"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/PLK1SPT-01_l.jpg?v=1527190836","options":["Title"],"media":[{"alt":"2\" Lift Kit Polaris Scrambler and Sportsman 550\/850\/1000 - Warranty Killer Performance","id":490321379393,"position":1,"preview_image":{"aspect_ratio":1.5,"height":400,"width":600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/PLK1SPT-01_l.jpg?v=1569027010"},"aspect_ratio":1.5,"height":400,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/PLK1SPT-01_l.jpg?v=1569027010","width":600}],"content":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eRelocate your shock mounts and get the lift need for tighter suspension and larger mud tires! Our lift consistently measures truer (and higher) than the competition!\u003c\/span\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eBigger. Badder. \u003c\/span\u003e\u003cstrong\u003eBOLDER\u003c\/strong\u003e\u003cspan\u003e. Take your ATV to the edge with High Lifter’s 2” Lift Kit.  Increase your ground clearance and make room for larger tires to dig deep and ride hard in most any terrain.  Our engineers and staff have spent over 20 years perfecting the ultimate ATV lift kit. The product?  An easy-to-install, bolt-on lift that \u003c\/span\u003e\u003cstrong\u003e\u003cem\u003econsistently\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e measures truer over competitor products.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe High Lifter 2” Lift Kit relocates the shock mounts to provide additional lift making room for larger tires and tightens suspension.  Each Lift Kit part  is precision cut and zinc plated for durability and reliability in \u003cem\u003eany\u003c\/em\u003e environment.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003e2” Lift Kit Features:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e·         All hardware needed for successful installation\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e·         User-friendly instructions\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e·         Bolt-on application; takes approximately 2.5 hours for install\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e·         Zinc plated\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e·         Front and rear lift\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003e*Rear factory upper a-arm modification is required\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e"}
2" Lift Kit Polaris Scrambler and Sportsman 550/850/1000 - Warranty Killer Performance

2" Lift Kit Polaris Scrambler and Sportsman 550/850/1000

PLK1SPT-01

$ 144.99

Relocate your shock mounts and get the lift need for tighter suspension and larger mud tires! Our lift consistently measures truer (and higher) than the competition! Bigger. Badder. BOLDER. Take your ATV to the edge with High Lifter’s 2” Lift Kit.  Increase your ground clearance and make room for larger tires to dig deep and ride hard in most ...


More Info
{"id":6059638977,"title":"2016 Can-Am Maverick 1000 High Lifter Series 4\" Lift Kit for Can-Am Maverick 1000","handle":"2016-can-am-maverick-1000-high-lifter-series-4-lift-kit-for-can-am-maverick-1000-clk1000m-51","description":"\u003cp\u003ePart #: CLK1000M-51\u003cbr\u003e4” Signature Series Lift Kit Features:\u003cbr\u003e·All hardware needed for successful installation\u003cbr\u003e·High Lifter logo precision laser cut into each kit\u003cbr\u003e·User-friendly instructions\u003cbr\u003e·Bolt-on application; takes approximately 1-2 hours for install\u003cbr\u003e·Powder-coated and plated for durability\u003cbr\u003e·Front and rear lift\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBigger. Badder. BOLDER. Take your ATV to the edge with High Lifter’s 4” Signature Series Lift Kit. Increase your ground clearance and make room for larger tires to dig deep and ride hard in most any terrain. Our engineers and staff have spent over 15 years perfecting the ultimate ATV lift kit. The product? The Signature Series Lift Kit is even easier to install with a bolt-on application that \u003cem\u003econsistently \u003c\/em\u003emeasures truer over competitor products.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOur 4” Signature Series Lift Kit for the Can-Am Maverick 1000 takes UTV lift kits to a new level of strength and durability. The front lift brackets are precision welded from ¼” American-made steel, while the rear plates are crafted from 3\/8” American-made steel. Each part in the kit is precision CNC laser cut, CNC bent, and CNC machined – a guarantee that your kit will fit just like our engineers designed it to be. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIn addition to the heavy-duty steel used in our brackets, our research and development team crafted new offset sway bar linkage that allows us to achieve additional lift without removing the sway bar. When combined with the heavy duty heims on the offset sway bar link, we’re able to achieve a 4” lift using stock axles – something the competitors cannot do!\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan\u003eNo other lift kit on the market can match the robust and rugged design of the Signature Series Lift Kit! \u003c\/span\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cstrong\u003eTire Fitment: \u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eCan-Am Maverick 1000 STD \u0026amp; XRS - Up to 35\"\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003eOur stated tire fitment guide is a general fitment and is in no way guaranteed.  Tires and lifts vary by manufacture and tire fitment can be affected by other modifications.  Always verify your brand of tires, lift, and other modifications prior to making a buying decision.\u003c\/em\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits: 2016 Can Am Maverick 1000 (Non XMR)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/files\/CLK1000M-51.pdf?6095885219668377701\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003e*Click here for the installation sheet\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","published_at":"2016-05-13T09:02:00-05:00","created_at":"2016-05-13T09:05:19-05:00","vendor":"High Lifter","type":"Suspension","tags":["Make_Can-Am","Model_Maverick","Model_Maverick 1000","Parts_Kits","Parts_Lifts","Year_2016"],"price":48999,"price_min":48999,"price_max":48999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":18663027073,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CLK1000M-51","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"2016 Can-Am Maverick 1000 High Lifter Series 4\" Lift Kit for Can-Am Maverick 1000","public_title":null,"options":["Default Title"],"price":48999,"weight":4536,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/4429.jpg?v=1527190859"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/4429.jpg?v=1527190859","options":["Title"],"media":[{"alt":"2016 Can-Am Maverick 1000 High Lifter Series 4\" Lift Kit for Can-Am Maverick 1000 - Warranty Killer Performance","id":64649527361,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/4429.jpg?v=1568746434"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/4429.jpg?v=1568746434","width":500}],"content":"\u003cp\u003ePart #: CLK1000M-51\u003cbr\u003e4” Signature Series Lift Kit Features:\u003cbr\u003e·All hardware needed for successful installation\u003cbr\u003e·High Lifter logo precision laser cut into each kit\u003cbr\u003e·User-friendly instructions\u003cbr\u003e·Bolt-on application; takes approximately 1-2 hours for install\u003cbr\u003e·Powder-coated and plated for durability\u003cbr\u003e·Front and rear lift\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBigger. Badder. BOLDER. Take your ATV to the edge with High Lifter’s 4” Signature Series Lift Kit. Increase your ground clearance and make room for larger tires to dig deep and ride hard in most any terrain. Our engineers and staff have spent over 15 years perfecting the ultimate ATV lift kit. The product? The Signature Series Lift Kit is even easier to install with a bolt-on application that \u003cem\u003econsistently \u003c\/em\u003emeasures truer over competitor products.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOur 4” Signature Series Lift Kit for the Can-Am Maverick 1000 takes UTV lift kits to a new level of strength and durability. The front lift brackets are precision welded from ¼” American-made steel, while the rear plates are crafted from 3\/8” American-made steel. Each part in the kit is precision CNC laser cut, CNC bent, and CNC machined – a guarantee that your kit will fit just like our engineers designed it to be. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIn addition to the heavy-duty steel used in our brackets, our research and development team crafted new offset sway bar linkage that allows us to achieve additional lift without removing the sway bar. When combined with the heavy duty heims on the offset sway bar link, we’re able to achieve a 4” lift using stock axles – something the competitors cannot do!\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan\u003eNo other lift kit on the market can match the robust and rugged design of the Signature Series Lift Kit! \u003c\/span\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cstrong\u003eTire Fitment: \u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eCan-Am Maverick 1000 STD \u0026amp; XRS - Up to 35\"\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003eOur stated tire fitment guide is a general fitment and is in no way guaranteed.  Tires and lifts vary by manufacture and tire fitment can be affected by other modifications.  Always verify your brand of tires, lift, and other modifications prior to making a buying decision.\u003c\/em\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits: 2016 Can Am Maverick 1000 (Non XMR)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/files\/CLK1000M-51.pdf?6095885219668377701\" target=\"_blank\"\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003e*Click here for the installation sheet\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e"}
2016 Can-Am Maverick 1000 High Lifter Series 4" Lift Kit for Can-Am Maverick 1000 - Warranty Killer Performance

2016 Can-Am Maverick 1000 High Lifter Series 4" Lift Kit for Can-Am Maverick 1000

CLK1000M-51

$ 489.99

Part #: CLK1000M-514” Signature Series Lift Kit Features:·All hardware needed for successful installation·High Lifter logo precision laser cut into each kit·User-friendly instructions·Bolt-on application; takes approximately 1-2 hours for install·Powder-coated and plated for durability·Front and rear lift Bigger. Badder. BOLDER. Take your ATV to...


More Info
Can Am Signature Series 2 inch Lift
CLK1000-50

Suspension

$ 249.99
{"id":3741580865,"title":"Can Am Signature Series 2 inch Lift","handle":"can-am-signature-series-2-inch-lift-clk1000-50","description":"Part #: CLK1000-50\u003cbr\u003eRequired Per Assembly: 1\u003cbr\u003eFits: 2014 Can Am 650 XT","published_at":"2015-12-22T16:22:00-06:00","created_at":"2015-12-22T16:23:06-06:00","vendor":"High Lifter","type":"Suspension","tags":["Make_Can-Am","Parts_Lifts","Year_2014"],"price":24999,"price_min":24999,"price_max":24999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":10881040961,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CLK1000-50","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Can Am Signature Series 2 inch Lift","public_title":null,"options":["Default Title"],"price":24999,"weight":9072,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/Can_Am_Signature_Series_2_inch_Lift_CLK1000-50.jpg?v=1527193404"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/Can_Am_Signature_Series_2_inch_Lift_CLK1000-50.jpg?v=1527193404","options":["Title"],"media":[{"alt":"Can Am Signature Series 2 inch Lift - Warranty Killer Performance","id":40339046465,"position":1,"preview_image":{"aspect_ratio":1.565,"height":782,"width":1224,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/Can_Am_Signature_Series_2_inch_Lift_CLK1000-50.jpg?v=1568715530"},"aspect_ratio":1.565,"height":782,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/Can_Am_Signature_Series_2_inch_Lift_CLK1000-50.jpg?v=1568715530","width":1224}],"content":"Part #: CLK1000-50\u003cbr\u003eRequired Per Assembly: 1\u003cbr\u003eFits: 2014 Can Am 650 XT"}
Can Am Signature Series 2 inch Lift - Warranty Killer Performance

Can Am Signature Series 2 inch Lift

CLK1000-50

$ 249.99

Part #: CLK1000-50Required Per Assembly: 1Fits: 2014 Can Am 650 XT


More Info
Chrome Valve Stem
412CHROME

Valve Stems

$ 1.99
{"id":16857497626,"title":"Chrome Valve Stem","handle":"chrome-valve-stem","description":"Part #: 412CHROME\u003cbr\u003eChrome Valve Stem","published_at":"2017-08-04T11:36:28-05:00","created_at":"2017-08-04T11:35:46-05:00","vendor":"High Lifter","type":"Valve Stems","tags":["Parts_Valve Stems"],"price":199,"price_min":199,"price_max":199,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":100197236762,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"412CHROME","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Chrome Valve Stem","public_title":null,"options":["Default Title"],"price":199,"weight":57,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/192_e0f1bc3e-54b3-4c29-8d49-8f94335c9540.jpg?v=1501864546"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/192_e0f1bc3e-54b3-4c29-8d49-8f94335c9540.jpg?v=1501864546","options":["Title"],"media":[{"alt":"HLP XL2 Chrome Valve Stem - Warranty Killer Performance","id":416500580417,"position":1,"preview_image":{"aspect_ratio":1.085,"height":211,"width":229,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/192_e0f1bc3e-54b3-4c29-8d49-8f94335c9540.jpg?v=1569009733"},"aspect_ratio":1.085,"height":211,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/192_e0f1bc3e-54b3-4c29-8d49-8f94335c9540.jpg?v=1569009733","width":229}],"content":"Part #: 412CHROME\u003cbr\u003eChrome Valve Stem"}
HLP XL2 Chrome Valve Stem - Warranty Killer Performance

Chrome Valve Stem

412CHROME

$ 1.99

Part #: 412CHROMEChrome Valve Stem


More Info
Front Tow Hook for Polaris RZR 1000 XP
TOWHK-F-RZR1-B

Accessories

$ 49.99
{"id":8614157837,"title":"Front Tow Hook for Polaris RZR 1000 XP","handle":"front-tow-hook-for-polaris-rzr-1000-xp","description":"\u003cp\u003e\u003cspan\u003eThe High Lifter Front Tow Hook is a must have for the Polaris 1000 RZR XP. Our Signature Series Tow Hook provides a solid place to hook onto the front when towing is needed!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e2014 Polaris RZR 1000 XP\u003cbr\u003e2014 Polaris RZR 1000 XP 4\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe High Lifter Signature Series Front Tow Hook for the Polaris 1000 RZR XP is powder coated black to match the factory finish of your UTV. With its rugged design and simple bolt-on application using factory hardware, the Front Tow Hook provides a tow point for the front of your RZR 1000.\u003c\/p\u003e\n\u003cdiv\u003eThe Front Tow Hook is 3\/8\" steel plate that is CNC bent with a design that allows you to attach almost any strap or hook to your RZR.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cp\u003eProudly made in the USA!\u003c\/p\u003e","published_at":"2016-12-15T15:18:00-06:00","created_at":"2016-12-15T15:21:54-06:00","vendor":"High Lifter","type":"Accessories","tags":["Make_Polaris","Model_RZR","Model_RZR 1000","Parts_Accessories","Year_2014"],"price":4999,"price_min":4999,"price_max":4999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29496395213,"title":"Black","option1":"Black","option2":null,"option3":null,"sku":"TOWHK-F-RZR1-B","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Front Tow Hook for Polaris RZR 1000 XP - Black","public_title":"Black","options":["Black"],"price":4999,"weight":4536,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":""},{"id":29496395277,"title":"Orange","option1":"Orange","option2":null,"option3":null,"sku":"TOWHK-F-RZR1-O","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Front Tow Hook for Polaris RZR 1000 XP - Orange","public_title":"Orange","options":["Orange"],"price":4999,"weight":4536,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":""},{"id":29496395341,"title":"Red","option1":"Red","option2":null,"option3":null,"sku":"TOWHK-F-RZR1-R","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Front Tow Hook for Polaris RZR 1000 XP - Red","public_title":"Red","options":["Red"],"price":4999,"weight":4536,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/4351_1__l.jpg?v=1481836916"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/4351_1__l.jpg?v=1481836916","options":["Color"],"media":[{"alt":null,"id":117681487937,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/4351_1__l.jpg?v=1568798865"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/4351_1__l.jpg?v=1568798865","width":600}],"content":"\u003cp\u003e\u003cspan\u003eThe High Lifter Front Tow Hook is a must have for the Polaris 1000 RZR XP. Our Signature Series Tow Hook provides a solid place to hook onto the front when towing is needed!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e2014 Polaris RZR 1000 XP\u003cbr\u003e2014 Polaris RZR 1000 XP 4\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe High Lifter Signature Series Front Tow Hook for the Polaris 1000 RZR XP is powder coated black to match the factory finish of your UTV. With its rugged design and simple bolt-on application using factory hardware, the Front Tow Hook provides a tow point for the front of your RZR 1000.\u003c\/p\u003e\n\u003cdiv\u003eThe Front Tow Hook is 3\/8\" steel plate that is CNC bent with a design that allows you to attach almost any strap or hook to your RZR.\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cp\u003eProudly made in the USA!\u003c\/p\u003e"}
Front Tow Hook for Polaris RZR 1000 XP

Front Tow Hook for Polaris RZR 1000 XP

TOWHK-F-RZR1-B

$ 49.99

The High Lifter Front Tow Hook is a must have for the Polaris 1000 RZR XP. Our Signature Series Tow Hook provides a solid place to hook onto the front when towing is needed! Fits: 2014 Polaris RZR 1000 XP2014 Polaris RZR 1000 XP 4 The High Lifter Signature Series Front Tow Hook for the Polaris 1000 RZR XP is powder coated black to match the fact...

Color
Black
Orange
Red

More Info
{"id":52940701722,"title":"High Lifter Front Tow Hook for Polaris RZR 900, 1000 XP and Turbo","handle":"high-lifter-front-tow-hook-for-polaris-rzr-900-1000-xp-and-turbo","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eThe High Lifter Front Tow Hook is a must have for the Polaris RZR.. Our Signature Series Tow Hook provides a solid place to hook onto the front when towing is needed! \u003c\/span\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThe High Lifter Signature Series Front Tow Hook for the Polaris RZR is powder coated in black to match the factory finish of your UTV. With its rugged design and simple bolt-on application.\u003c\/p\u003e\n\u003cp\u003eThis Front Tow Hook comes with a heavy duty backing plate and all required hardware. \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eNOTE: This Front Tow Hook will not work with winch bumpers.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis tow plate comes powder-coated in black.\u003c\/strong\u003e\u003c\/p\u003e","published_at":"2017-08-29T11:29:15-05:00","created_at":"2017-08-29T11:31:28-05:00","vendor":"High Lifter","type":"Chassis","tags":[],"price":7999,"price_min":7999,"price_max":7999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":507225079834,"title":"Black","option1":"Black","option2":null,"option3":null,"sku":"TOWHK-F-RZR1-1-B","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"High Lifter Front Tow Hook for Polaris RZR 900, 1000 XP and Turbo - Black","public_title":"Black","options":["Black"],"price":7999,"weight":2268,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/4796_l.jpg?v=1504024290"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/4796_l.jpg?v=1504024290","options":["Color"],"media":[{"alt":null,"id":445451796545,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/4796_l.jpg?v=1569015807"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/4796_l.jpg?v=1569015807","width":600}],"content":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eThe High Lifter Front Tow Hook is a must have for the Polaris RZR.. Our Signature Series Tow Hook provides a solid place to hook onto the front when towing is needed! \u003c\/span\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThe High Lifter Signature Series Front Tow Hook for the Polaris RZR is powder coated in black to match the factory finish of your UTV. With its rugged design and simple bolt-on application.\u003c\/p\u003e\n\u003cp\u003eThis Front Tow Hook comes with a heavy duty backing plate and all required hardware. \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eNOTE: This Front Tow Hook will not work with winch bumpers.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis tow plate comes powder-coated in black.\u003c\/strong\u003e\u003c\/p\u003e"}
High Lifter Front Tow Hook for Polaris RZR 900, 1000 XP and Turbo

High Lifter Front Tow Hook for Polaris RZR 900, 1000 XP and Turbo

TOWHK-F-RZR1-1-B

$ 79.99

The High Lifter Front Tow Hook is a must have for the Polaris RZR.. Our Signature Series Tow Hook provides a solid place to hook onto the front when towing is needed! The High Lifter Signature Series Front Tow Hook for the Polaris RZR is powder coated in black to match the factory finish of your UTV. With its rugged design and simple bolt-on ...


More Info
{"id":52914421786,"title":"High Lifter Rear Tow Hook for Can Am Maverick X3","handle":"high-lifter-rear-tow-hook-for-can-am-maverick-x3","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eThe High Lifter Rear Tow Hook for the Can-Am Maverick X3 provides a solid place to hook onto when towing is needed. \u003c\/span\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eThe newly designed Can-Am Maverick X3 Tow Hook can be used two different ways. The Tow Hook was engineered for use with a tow strap or clevis hook. With this unique design, you can use any kind of tow strap or rope that is available, plus it allows for a faster hook-up to get you back on the trail in no time.\u003c\/span\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003eThis product comes powder coated in black.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eApplication:\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e2017 Can-Am Maverick X3 STD\u003c\/li\u003e\n\u003cli\u003e2017 Can-Am Maverick X3 XDS\u003c\/li\u003e\n\u003cli\u003e2017 Can-Am Maverick X3 XRS\u003c\/li\u003e\n\u003cli\u003e2017 Can-Am Maverick X3 MAX STD\u003c\/li\u003e\n\u003cli\u003e2017 Can-Am Maverick X3 MAX XRS\u003c\/li\u003e\n\u003cli\u003e2018 Can-Am Maverick X3 Turbo\u003c\/li\u003e\n\u003cli\u003e2018 Can-Am Maverick X3 Turbo R\u003c\/li\u003e\n\u003cli\u003e2018 Can-Am Maverick X3 Turbo R XDS\u003c\/li\u003e\n\u003cli\u003e2018 Can-Am Maverick X3 Turbo R XRS\u003c\/li\u003e\n\u003cli\u003e2018 Can-Am Maverick X3 Turbo MAX\u003c\/li\u003e\n\u003cli\u003e2018 Can-Am Maverick X3 Turbo R MAX\u003c\/li\u003e\n\u003cli\u003e2018 Can-Am Maverick X3 Turbo R MAX XDS\u003c\/li\u003e\n\u003cli\u003e2018 Can-Am Maverick X3 Turbo R MAX XRS\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","published_at":"2017-08-29T11:20:30-05:00","created_at":"2017-08-29T11:24:08-05:00","vendor":"High Lifter","type":"Chassis","tags":["Make_Can-Am","Model_Maverick","Model_Maverick X3","Parts_Accessories","Parts_Towing","Year_2017","Year_2018"],"price":8999,"price_min":8999,"price_max":8999,"available":true,"price_varies":false,"compare_at_price":8999,"compare_at_price_min":8999,"compare_at_price_max":8999,"compare_at_price_varies":false,"variants":[{"id":506975748122,"title":"Black","option1":"Black","option2":null,"option3":null,"sku":"TOWHK-CMX3-B","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"High Lifter Rear Tow Hook for Can Am Maverick X3 - Black","public_title":"Black","options":["Black"],"price":8999,"weight":2268,"compare_at_price":8999,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/TOWHK-CMX3-l.gif?v=1504023850","\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/TOWHK-CMX3-Clevis-l.gif?v=1504023851","\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/TOWHK-CMX3-Strap-l.gif?v=1504023852"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/TOWHK-CMX3-l.gif?v=1504023850","options":["Color"],"media":[{"alt":null,"id":445440327745,"position":1,"preview_image":{"aspect_ratio":1.5,"height":400,"width":600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/TOWHK-CMX3-l.gif?v=1569015805"},"aspect_ratio":1.5,"height":400,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/TOWHK-CMX3-l.gif?v=1569015805","width":600},{"alt":null,"id":445440426049,"position":2,"preview_image":{"aspect_ratio":1.5,"height":400,"width":600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/TOWHK-CMX3-Clevis-l.gif?v=1569015805"},"aspect_ratio":1.5,"height":400,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/TOWHK-CMX3-Clevis-l.gif?v=1569015805","width":600},{"alt":null,"id":445440458817,"position":3,"preview_image":{"aspect_ratio":1.5,"height":400,"width":600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/TOWHK-CMX3-Strap-l.gif?v=1569015805"},"aspect_ratio":1.5,"height":400,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/TOWHK-CMX3-Strap-l.gif?v=1569015805","width":600}],"content":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eThe High Lifter Rear Tow Hook for the Can-Am Maverick X3 provides a solid place to hook onto when towing is needed. \u003c\/span\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eThe newly designed Can-Am Maverick X3 Tow Hook can be used two different ways. The Tow Hook was engineered for use with a tow strap or clevis hook. With this unique design, you can use any kind of tow strap or rope that is available, plus it allows for a faster hook-up to get you back on the trail in no time.\u003c\/span\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003eThis product comes powder coated in black.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eApplication:\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e2017 Can-Am Maverick X3 STD\u003c\/li\u003e\n\u003cli\u003e2017 Can-Am Maverick X3 XDS\u003c\/li\u003e\n\u003cli\u003e2017 Can-Am Maverick X3 XRS\u003c\/li\u003e\n\u003cli\u003e2017 Can-Am Maverick X3 MAX STD\u003c\/li\u003e\n\u003cli\u003e2017 Can-Am Maverick X3 MAX XRS\u003c\/li\u003e\n\u003cli\u003e2018 Can-Am Maverick X3 Turbo\u003c\/li\u003e\n\u003cli\u003e2018 Can-Am Maverick X3 Turbo R\u003c\/li\u003e\n\u003cli\u003e2018 Can-Am Maverick X3 Turbo R XDS\u003c\/li\u003e\n\u003cli\u003e2018 Can-Am Maverick X3 Turbo R XRS\u003c\/li\u003e\n\u003cli\u003e2018 Can-Am Maverick X3 Turbo MAX\u003c\/li\u003e\n\u003cli\u003e2018 Can-Am Maverick X3 Turbo R MAX\u003c\/li\u003e\n\u003cli\u003e2018 Can-Am Maverick X3 Turbo R MAX XDS\u003c\/li\u003e\n\u003cli\u003e2018 Can-Am Maverick X3 Turbo R MAX XRS\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e"}
High Lifter Rear Tow Hook for Can Am Maverick X3

High Lifter Rear Tow Hook for Can Am Maverick X3

TOWHK-CMX3-B

$ 89.99

The High Lifter Rear Tow Hook for the Can-Am Maverick X3 provides a solid place to hook onto when towing is needed. The newly designed Can-Am Maverick X3 Tow Hook can be used two different ways. The Tow Hook was engineered for use with a tow strap or clevis hook. With this unique design, you can use any kind of tow strap or rope that is avail...


More Info
High Lifter Riser Snorkel Can-Am Defender
SNORK-C1D

Intake

$ 234.99
{"id":8613937613,"title":"High Lifter Riser Snorkel Can-Am Defender","handle":"high-lifter-riser-snorkel-can-am-defender","description":"\u003cp\u003e\u003cspan\u003eHigh Lifter makes the highest quality and most comprehensive snorkel kit in the ATV industry. Our High Lifter Snorkels are the best looking and most professional appearing kits on the market. From fit to finish, to the level of detail, our kits are not only built to work, they are built to look good while doing it. There are no returns or refunds on any brand of snorkel. Note: You have to cut\/trim some plastic to install this kit.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFits:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e2016 Can-Am Defender 800R\u003cbr\u003e2016 Can-Am Defender 1000\u003cbr\u003e2016 Can-Am Defender 800R DPS\u003cbr\u003e2016 Can-Am Defender 1000 DPS\u003cbr\u003e2016 Can-Am Defender 800R XT\u003cbr\u003e2016 Can-Am Defender 1000 XT\u003cbr\u003e2017 Can-Am Defender 1000\u003cbr\u003e2017 Can-Am Defender 1000 DPS\u003cbr\u003e2017 Can-Am Defender 1000 XT\u003cbr\u003e2017 Can-Am Defender 800 BASE\u003cbr\u003e2017 Can-Am Defender 800R\u003cbr\u003e2017 Can-Am Defender 800R DPS\u003cbr\u003e2017 Can-Am Defender 800R XT\u003cbr\u003e2017 Can-Am Defender MAX 1000 DPS\u003cbr\u003e2017 Can-Am Defender MAX 1000 XT\u003cbr\u003e2017 Can-Am Defender MAX 800 DPS\u003cbr\u003e2017 Can-Am Defender MAX 800 XT\u003c\/span\u003e\u003c\/p\u003e","published_at":"2016-12-15T14:22:00-06:00","created_at":"2016-12-15T14:24:44-06:00","vendor":"High Lifter","type":"Intake","tags":["Make_Can-Am","Model_Defender","Model_Defender 1000","Model_Defender 800","Parts_Accessories","Parts_Snorkels","Year_2016","Year_2017"],"price":23499,"price_min":23499,"price_max":23499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29495813581,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SNORK-C1D","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"High Lifter Riser Snorkel Can-Am Defender","public_title":null,"options":["Default Title"],"price":23499,"weight":6804,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/SNORK-C1D_l.jpg?v=1481833488"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/SNORK-C1D_l.jpg?v=1481833488","options":["Title"],"media":[{"alt":null,"id":117676769345,"position":1,"preview_image":{"aspect_ratio":0.867,"height":773,"width":670,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/SNORK-C1D_l.jpg?v=1568798862"},"aspect_ratio":0.867,"height":773,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/SNORK-C1D_l.jpg?v=1568798862","width":670}],"content":"\u003cp\u003e\u003cspan\u003eHigh Lifter makes the highest quality and most comprehensive snorkel kit in the ATV industry. Our High Lifter Snorkels are the best looking and most professional appearing kits on the market. From fit to finish, to the level of detail, our kits are not only built to work, they are built to look good while doing it. There are no returns or refunds on any brand of snorkel. Note: You have to cut\/trim some plastic to install this kit.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFits:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e2016 Can-Am Defender 800R\u003cbr\u003e2016 Can-Am Defender 1000\u003cbr\u003e2016 Can-Am Defender 800R DPS\u003cbr\u003e2016 Can-Am Defender 1000 DPS\u003cbr\u003e2016 Can-Am Defender 800R XT\u003cbr\u003e2016 Can-Am Defender 1000 XT\u003cbr\u003e2017 Can-Am Defender 1000\u003cbr\u003e2017 Can-Am Defender 1000 DPS\u003cbr\u003e2017 Can-Am Defender 1000 XT\u003cbr\u003e2017 Can-Am Defender 800 BASE\u003cbr\u003e2017 Can-Am Defender 800R\u003cbr\u003e2017 Can-Am Defender 800R DPS\u003cbr\u003e2017 Can-Am Defender 800R XT\u003cbr\u003e2017 Can-Am Defender MAX 1000 DPS\u003cbr\u003e2017 Can-Am Defender MAX 1000 XT\u003cbr\u003e2017 Can-Am Defender MAX 800 DPS\u003cbr\u003e2017 Can-Am Defender MAX 800 XT\u003c\/span\u003e\u003c\/p\u003e"}
High Lifter Riser Snorkel Can-Am Defender

High Lifter Riser Snorkel Can-Am Defender

SNORK-C1D

$ 234.99

High Lifter makes the highest quality and most comprehensive snorkel kit in the ATV industry. Our High Lifter Snorkels are the best looking and most professional appearing kits on the market. From fit to finish, to the level of detail, our kits are not only built to work, they are built to look good while doing it. There are no returns or refund...


More Info
High Lifter Riser Snorkel Polaris RZR S 1000
SNORK-RZR1S

Intake

$ 329.99
{"id":8614088141,"title":"High Lifter Riser Snorkel Polaris RZR S 1000","handle":"high-lifter-riser-snorkel-polaris-rzr-s-1000","description":"\u003cp\u003e\u003cspan\u003eHigh Lifter makes the highest quality and most comprehensive snorkel kit in the ATV industry. Our High Lifter Snorkels are the best looking and most professional appearing kits on the market. From fit to finish, to the level of detail, our kits are not only built to work, they are built to look good while doing it. There are no returns or refunds on any brand of snorkel.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e2016 Polaris RZR 1000 S\u003cbr\u003e2017 Polaris RZR 1000 S EPS\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis Diver Down Snorkel kit contains everything you need to properly snorkel your ride.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eCustom Powder Coated Riser Bracket to keep risers straight, evenly spaced and looking good\u003cbr\u003eRubber Grommets to hold riser tubes in place\u003cbr\u003e1 1\/2\", 2\" or 3\" Risers- based on specific model\u003cbr\u003eHeavy Duty Vinyl Tubing to route difficult locations where the competition uses think tubing\u003cbr\u003eHigh Heat Silicon Hose in those critical areas where the competition melts\u003cbr\u003eBellows to keep water out of differentials and transmission\u003cbr\u003eAll mounting hardware for complete installation\u003cbr\u003eStep-by-step instructions complete with detailed photos\u003cbr\u003e\u003cstrong\u003eBenefits:\u003c\/strong\u003e\u003cbr\u003eProvides clean, dry air to the engine and other parts needing venting\u003cbr\u003ePrevents mud, water and debris from entering the engine and clutch housings when equipped\u003cbr\u003eBellows allow the differential and transmission air to expand and contract without the need for long vent lines that can easily get plugged with mud or be pulled off\u003cbr\u003eEach Kit is engineered and cut to fit your specific application\u003cbr\u003e\u003cstrong\u003eFAQ:\u003c\/strong\u003e\u003cbr\u003eWhy Snorkel? Simply put – The right snorkel can be the best insurance you buy for your ATV or UTV. The right snorkel can protect you expensive investment from disaster when submerged deeper than OE rated water depth. On the other hand, the wrong snorkel can be your worst investment and nightmare. We’ve seen countless units come through our shop with leaking snorkels.\u003cbr\u003eHow could that happen? Snorkels leak for a variety of reasons. Installation errors account for a lot these. Many times a do-it-yourselfer may get it right, but only for a short time. When pipes aren’t cut to correct length and things don’t line up quite right, many times the snorkel will prevent water, but only for a limited time, then the joint fails. One of the most common that we’ve seen is failure due to a heat source. When the snorkel runs close to heat source the snorkel material deteriorates during each ride. The material gets harder and more brittle and many times begins to deform. At some point the material cracks and begins to let mud and water in. Less expensive kits rarely provide the heat resistant material to account for this. Our goal is to avoid these areas. This can take more time and more material, but goes a long way to extending the life of the snorkel and the ATV\/UTV.\u003cbr\u003eWhat does a Snorkel do? A snorkel kit is intended to provide clean, dry air to the engine and other parts needing venting on ATVs\/UTVs such as clutches, differentials, transmission, carburetors and fuel tanks. This doesn’t necessarily mean the ATV\/UTV should exceed the OE manufacturer’s stated maximum rated water line depth. The snorkel kit is intended as additional margin of protection in the event that the ATV\/UTV is inadvertently driven into water deeper than the OE manufacturer’s air intakes will tolerate. There are many considerations to make when increasing water line depth and a snorkel is just one component.\u003cbr\u003eWe know a little about taking off-road vehicles to the extreme - especially when it comes to deep water and mud. Trust us to protect your ride from deep water hazards with Diver Down Snorkels by High Lifter Products.\u003c\/span\u003e\u003c\/p\u003e","published_at":"2016-12-15T14:57:00-06:00","created_at":"2016-12-15T15:00:18-06:00","vendor":"High Lifter","type":"Intake","tags":["Make_Polaris","Model_RZR","Model_RZR 1000","Parts_Accessories","Parts_Snorkels","Year_2016"],"price":32999,"price_min":32999,"price_max":32999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29496235085,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SNORK-RZR1S","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"High Lifter Riser Snorkel Polaris RZR S 1000","public_title":null,"options":["Default Title"],"price":32999,"weight":6804,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/5074_l.jpg?v=1481835620"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/5074_l.jpg?v=1481835620","options":["Title"],"media":[{"alt":null,"id":117680865345,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/5074_l.jpg?v=1568798865"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/5074_l.jpg?v=1568798865","width":600}],"content":"\u003cp\u003e\u003cspan\u003eHigh Lifter makes the highest quality and most comprehensive snorkel kit in the ATV industry. Our High Lifter Snorkels are the best looking and most professional appearing kits on the market. From fit to finish, to the level of detail, our kits are not only built to work, they are built to look good while doing it. There are no returns or refunds on any brand of snorkel.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e2016 Polaris RZR 1000 S\u003cbr\u003e2017 Polaris RZR 1000 S EPS\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis Diver Down Snorkel kit contains everything you need to properly snorkel your ride.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eCustom Powder Coated Riser Bracket to keep risers straight, evenly spaced and looking good\u003cbr\u003eRubber Grommets to hold riser tubes in place\u003cbr\u003e1 1\/2\", 2\" or 3\" Risers- based on specific model\u003cbr\u003eHeavy Duty Vinyl Tubing to route difficult locations where the competition uses think tubing\u003cbr\u003eHigh Heat Silicon Hose in those critical areas where the competition melts\u003cbr\u003eBellows to keep water out of differentials and transmission\u003cbr\u003eAll mounting hardware for complete installation\u003cbr\u003eStep-by-step instructions complete with detailed photos\u003cbr\u003e\u003cstrong\u003eBenefits:\u003c\/strong\u003e\u003cbr\u003eProvides clean, dry air to the engine and other parts needing venting\u003cbr\u003ePrevents mud, water and debris from entering the engine and clutch housings when equipped\u003cbr\u003eBellows allow the differential and transmission air to expand and contract without the need for long vent lines that can easily get plugged with mud or be pulled off\u003cbr\u003eEach Kit is engineered and cut to fit your specific application\u003cbr\u003e\u003cstrong\u003eFAQ:\u003c\/strong\u003e\u003cbr\u003eWhy Snorkel? Simply put – The right snorkel can be the best insurance you buy for your ATV or UTV. The right snorkel can protect you expensive investment from disaster when submerged deeper than OE rated water depth. On the other hand, the wrong snorkel can be your worst investment and nightmare. We’ve seen countless units come through our shop with leaking snorkels.\u003cbr\u003eHow could that happen? Snorkels leak for a variety of reasons. Installation errors account for a lot these. Many times a do-it-yourselfer may get it right, but only for a short time. When pipes aren’t cut to correct length and things don’t line up quite right, many times the snorkel will prevent water, but only for a limited time, then the joint fails. One of the most common that we’ve seen is failure due to a heat source. When the snorkel runs close to heat source the snorkel material deteriorates during each ride. The material gets harder and more brittle and many times begins to deform. At some point the material cracks and begins to let mud and water in. Less expensive kits rarely provide the heat resistant material to account for this. Our goal is to avoid these areas. This can take more time and more material, but goes a long way to extending the life of the snorkel and the ATV\/UTV.\u003cbr\u003eWhat does a Snorkel do? A snorkel kit is intended to provide clean, dry air to the engine and other parts needing venting on ATVs\/UTVs such as clutches, differentials, transmission, carburetors and fuel tanks. This doesn’t necessarily mean the ATV\/UTV should exceed the OE manufacturer’s stated maximum rated water line depth. The snorkel kit is intended as additional margin of protection in the event that the ATV\/UTV is inadvertently driven into water deeper than the OE manufacturer’s air intakes will tolerate. There are many considerations to make when increasing water line depth and a snorkel is just one component.\u003cbr\u003eWe know a little about taking off-road vehicles to the extreme - especially when it comes to deep water and mud. Trust us to protect your ride from deep water hazards with Diver Down Snorkels by High Lifter Products.\u003c\/span\u003e\u003c\/p\u003e"}
High Lifter Riser Snorkel Polaris RZR S 1000

High Lifter Riser Snorkel Polaris RZR S 1000

SNORK-RZR1S

$ 329.99

High Lifter makes the highest quality and most comprehensive snorkel kit in the ATV industry. Our High Lifter Snorkels are the best looking and most professional appearing kits on the market. From fit to finish, to the level of detail, our kits are not only built to work, they are built to look good while doing it. There are no returns or refund...


More Info
High Lifter Riser Snorkel Polaris RZR XP 1000
SNORK-RZR1-1

Intake

$ 539.99
{"id":8614101453,"title":"High Lifter Riser Snorkel Polaris RZR XP 1000","handle":"high-lifter-riser-snorkel-polaris-rzr-xp-1000","description":"\u003cp\u003e\u003cspan\u003eHigh Lifter makes the highest quality and most comprehensive snorkel kit in the ATV industry. Our High Lifter Snorkels are the best looking and most professional appearing kits on the market. From fit to finish, to the level of detail, our kits are not only built to work, they are built to look good while doing it. There are no returns or refunds on any brand of snorkel.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e2016 Polaris RZR 1000 XP EPS\u003cbr\u003e2015 Polaris RZR 1000 XP EPS\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis Diver Down Snorkel kit contains everything you need to properly snorkel your ride.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eCustom Powder Coated Riser Bracket to keep risers straight, evenly spaced and looking good\u003cbr\u003eRubber Grommets to hold riser tubes in place\u003cbr\u003e1 1\/2\", 2\" or 3\" Risers- based on specific model\u003cbr\u003eHeavy Duty Vinyl Tubing to route difficult locations where the competition uses think tubing\u003cbr\u003eHigh Heat Silicon Hose in those critical areas where the competition melts\u003cbr\u003eBellows to keep water out of differentials and transmission\u003cbr\u003eAll mounting hardware for complete installation\u003cbr\u003eStep-by-step instructions complete with detailed photos\u003cbr\u003e\u003cstrong\u003eBenefits:\u003c\/strong\u003e\u003cbr\u003eProvides clean, dry air to the engine and other parts needing venting\u003cbr\u003ePrevents mud, water and debris from entering the engine and clutch housings when equipped\u003cbr\u003eBellows allow the differential and transmission air to expand and contract without the need for long vent lines that can easily get plugged with mud or be pulled off\u003cbr\u003eEach Kit is engineered and cut to fit your specific application\u003cbr\u003e\u003cstrong\u003eFAQ:\u003c\/strong\u003e\u003cbr\u003eWhy Snorkel? Simply put – The right snorkel can be the best insurance you buy for your ATV or UTV. The right snorkel can protect you expensive investment from disaster when submerged deeper than OE rated water depth. On the other hand, the wrong snorkel can be your worst investment and nightmare. We’ve seen countless units come through our shop with leaking snorkels.\u003cbr\u003eHow could that happen? Snorkels leak for a variety of reasons. Installation errors account for a lot these. Many times a do-it-yourselfer may get it right, but only for a short time. When pipes aren’t cut to correct length and things don’t line up quite right, many times the snorkel will prevent water, but only for a limited time, then the joint fails. One of the most common that we’ve seen is failure due to a heat source. When the snorkel runs close to heat source the snorkel material deteriorates during each ride. The material gets harder and more brittle and many times begins to deform. At some point the material cracks and begins to let mud and water in. Less expensive kits rarely provide the heat resistant material to account for this. Our goal is to avoid these areas. This can take more time and more material, but goes a long way to extending the life of the snorkel and the ATV\/UTV.\u003cbr\u003eWhat does a Snorkel do? A snorkel kit is intended to provide clean, dry air to the engine and other parts needing venting on ATVs\/UTVs such as clutches, differentials, transmission, carburetors and fuel tanks. This doesn’t necessarily mean the ATV\/UTV should exceed the OE manufacturer’s stated maximum rated water line depth. The snorkel kit is intended as additional margin of protection in the event that the ATV\/UTV is inadvertently driven into water deeper than the OE manufacturer’s air intakes will tolerate. There are many considerations to make when increasing water line depth and a snorkel is just one component.\u003cbr\u003eWe know a little about taking off-road vehicles to the extreme - especially when it comes to deep water and mud. Trust us to protect your ride from deep water hazards with Diver Down Snorkels by High Lifter Products.\u003c\/span\u003e\u003c\/p\u003e","published_at":"2016-12-15T15:01:00-06:00","created_at":"2016-12-15T15:03:59-06:00","vendor":"High Lifter","type":"Intake","tags":["Make_Polaris","Model_RZR","Model_RZR 1000","Parts_Accessories","Parts_Snorkels","Year_2015","Year_2016"],"price":53999,"price_min":53999,"price_max":53999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29496264589,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SNORK-RZR1-1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"High Lifter Riser Snorkel Polaris RZR XP 1000","public_title":null,"options":["Default Title"],"price":53999,"weight":6804,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/4750_l.jpg?v=1481835843"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/4750_l.jpg?v=1481835843","options":["Title"],"media":[{"alt":null,"id":117681061953,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/4750_l.jpg?v=1568798865"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/4750_l.jpg?v=1568798865","width":600}],"content":"\u003cp\u003e\u003cspan\u003eHigh Lifter makes the highest quality and most comprehensive snorkel kit in the ATV industry. Our High Lifter Snorkels are the best looking and most professional appearing kits on the market. From fit to finish, to the level of detail, our kits are not only built to work, they are built to look good while doing it. There are no returns or refunds on any brand of snorkel.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e2016 Polaris RZR 1000 XP EPS\u003cbr\u003e2015 Polaris RZR 1000 XP EPS\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis Diver Down Snorkel kit contains everything you need to properly snorkel your ride.\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eCustom Powder Coated Riser Bracket to keep risers straight, evenly spaced and looking good\u003cbr\u003eRubber Grommets to hold riser tubes in place\u003cbr\u003e1 1\/2\", 2\" or 3\" Risers- based on specific model\u003cbr\u003eHeavy Duty Vinyl Tubing to route difficult locations where the competition uses think tubing\u003cbr\u003eHigh Heat Silicon Hose in those critical areas where the competition melts\u003cbr\u003eBellows to keep water out of differentials and transmission\u003cbr\u003eAll mounting hardware for complete installation\u003cbr\u003eStep-by-step instructions complete with detailed photos\u003cbr\u003e\u003cstrong\u003eBenefits:\u003c\/strong\u003e\u003cbr\u003eProvides clean, dry air to the engine and other parts needing venting\u003cbr\u003ePrevents mud, water and debris from entering the engine and clutch housings when equipped\u003cbr\u003eBellows allow the differential and transmission air to expand and contract without the need for long vent lines that can easily get plugged with mud or be pulled off\u003cbr\u003eEach Kit is engineered and cut to fit your specific application\u003cbr\u003e\u003cstrong\u003eFAQ:\u003c\/strong\u003e\u003cbr\u003eWhy Snorkel? Simply put – The right snorkel can be the best insurance you buy for your ATV or UTV. The right snorkel can protect you expensive investment from disaster when submerged deeper than OE rated water depth. On the other hand, the wrong snorkel can be your worst investment and nightmare. We’ve seen countless units come through our shop with leaking snorkels.\u003cbr\u003eHow could that happen? Snorkels leak for a variety of reasons. Installation errors account for a lot these. Many times a do-it-yourselfer may get it right, but only for a short time. When pipes aren’t cut to correct length and things don’t line up quite right, many times the snorkel will prevent water, but only for a limited time, then the joint fails. One of the most common that we’ve seen is failure due to a heat source. When the snorkel runs close to heat source the snorkel material deteriorates during each ride. The material gets harder and more brittle and many times begins to deform. At some point the material cracks and begins to let mud and water in. Less expensive kits rarely provide the heat resistant material to account for this. Our goal is to avoid these areas. This can take more time and more material, but goes a long way to extending the life of the snorkel and the ATV\/UTV.\u003cbr\u003eWhat does a Snorkel do? A snorkel kit is intended to provide clean, dry air to the engine and other parts needing venting on ATVs\/UTVs such as clutches, differentials, transmission, carburetors and fuel tanks. This doesn’t necessarily mean the ATV\/UTV should exceed the OE manufacturer’s stated maximum rated water line depth. The snorkel kit is intended as additional margin of protection in the event that the ATV\/UTV is inadvertently driven into water deeper than the OE manufacturer’s air intakes will tolerate. There are many considerations to make when increasing water line depth and a snorkel is just one component.\u003cbr\u003eWe know a little about taking off-road vehicles to the extreme - especially when it comes to deep water and mud. Trust us to protect your ride from deep water hazards with Diver Down Snorkels by High Lifter Products.\u003c\/span\u003e\u003c\/p\u003e"}
High Lifter Riser Snorkel Polaris RZR XP 1000

High Lifter Riser Snorkel Polaris RZR XP 1000

SNORK-RZR1-1

$ 539.99

High Lifter makes the highest quality and most comprehensive snorkel kit in the ATV industry. Our High Lifter Snorkels are the best looking and most professional appearing kits on the market. From fit to finish, to the level of detail, our kits are not only built to work, they are built to look good while doing it. There are no returns or refund...


More Info
High Lifter Series 2" Lift Kit Can-Am Outlander
CLK570L-00

Suspension

$ 139.99
{"id":8613911437,"title":"High Lifter Series 2\" Lift Kit Can-Am Outlander","handle":"high-lifter-series-2-lift-kit-can-am-outlander","description":"\u003cspan\u003eRelocate your shock mounts and get the lift need for tighter suspension and larger mud tires! Our lift consistently measures truer (and higher) than the competition!\u003c\/span\u003e","published_at":"2016-12-15T14:18:00-06:00","created_at":"2016-12-15T14:20:05-06:00","vendor":"High Lifter","type":"Suspension","tags":[],"price":13999,"price_min":13999,"price_max":13999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29495754701,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CLK570L-00","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"High Lifter Series 2\" Lift Kit Can-Am Outlander","public_title":null,"options":["Default Title"],"price":13999,"weight":9072,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/CLK570L-00_l.gif?v=1481833207"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/CLK570L-00_l.gif?v=1481833207","options":["Title"],"media":[{"alt":null,"id":117676310593,"position":1,"preview_image":{"aspect_ratio":1.045,"height":574,"width":600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/CLK570L-00_l.gif?v=1568798862"},"aspect_ratio":1.045,"height":574,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/CLK570L-00_l.gif?v=1568798862","width":600}],"content":"\u003cspan\u003eRelocate your shock mounts and get the lift need for tighter suspension and larger mud tires! Our lift consistently measures truer (and higher) than the competition!\u003c\/span\u003e"}
High Lifter Series 2" Lift Kit Can-Am Outlander

High Lifter Series 2" Lift Kit Can-Am Outlander

CLK570L-00

$ 139.99

Relocate your shock mounts and get the lift need for tighter suspension and larger mud tires! Our lift consistently measures truer (and higher) than the competition!


More Info
{"id":8614045133,"title":"High Lifter Series Lift Kit Can-Am Commander 800\/1000","handle":"high-lifter-series-lift-kit-can-am-commander-800-1000","description":"\u003cp\u003e\u003cspan\u003eRelocate your shock mounts and get the lift need for tighter suspension and larger mud tires! Our lift consistently measures truer (and higher) than the competition!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFits: \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e2016 Can-Am Commander 800\u003cbr\u003e2016 Can-Am Commander 800 DPS\u003cbr\u003e2016 Can-Am Commander 1000 DPS\u003cbr\u003e2016 Can-Am Commander 800 XT\u003cbr\u003e2016 Can-Am Commander 1000 XT\u003cbr\u003e2016 Can-Am Commander 1000 XT-P\u003cbr\u003e2016 Can-Am Commander 1000 LTD\u003cbr\u003e2015 Can-Am Commander 800\u003cbr\u003e2015 Can-Am Commander 800 DPS\u003cbr\u003e2015 Can-Am Commander 800 XT\u003cbr\u003e2015 Can-Am Commander 1000 DPS\u003cbr\u003e2015 Can-Am Commander 1000 XT\u003cbr\u003e2015 Can-Am Commander 1000 XT-P\u003cbr\u003e2015 Can-Am Commander 1000 LTD\u003cbr\u003e2017 Can-Am Commander 1000 DPS\u003cbr\u003e2017 Can-Am Commander 1000 LTD\u003cbr\u003e2017 Can-Am Commander 1000 XT\u003cbr\u003e2017 Can-Am Commander 1000 XT-P\u003cbr\u003e2017 Can-Am Commander 800\u003cbr\u003e2017 Can-Am Commander 800 DPS\u003cbr\u003e2017 Can-Am Commander 800 XT\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBigger. Badder. BOLDER. Take your ATV to the edge with High Lifter’s 2” Lift Kit. Increase your ground clearance and make room for larger tires to dig deep and ride hard in most any terrain. Our engineers and staff have spent over 20 years perfecting the ultimate ATV lift kit. The product? An easy-to-install, bolt-on lift that consistently measures truer over competitor products.\u003cbr\u003e\u003cbr\u003eThe High Lifter 2” Lift Kit relocates the shock mounts to provide additional lift making room for larger tires and tightens suspension. Each Lift Kit part is precision cut and zinc plated for durability and reliability in any environment.\u003cbr\u003e2” Signature Series Lift Kit Features:\u003cbr\u003e· All hardware needed for successful installation \u003cbr\u003e· User-friendly instructions\u003cbr\u003e· Bolt-on application; takes approximately 1-2 hours for install\u003cbr\u003e· Zinc plated\u003cbr\u003e· Front and rear lift\u003cbr\u003e\u003cbr\u003eNOTE: Does not fit Can-Am Commander 1000X model with Fox Shocks.\u003c\/span\u003e\u003c\/p\u003e","published_at":"2016-12-15T14:43:00-06:00","created_at":"2016-12-15T14:46:26-06:00","vendor":"High Lifter","type":"Suspension","tags":["Make_Can-Am","Model_Commander","Model_Commander 1000","Model_Commander 800","Parts_Lifts","Year_2015","Year_2016","Year_2017"],"price":15999,"price_min":15999,"price_max":15999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29496136781,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CLK1000C-51","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"High Lifter Series Lift Kit Can-Am Commander 800\/1000","public_title":null,"options":["Default Title"],"price":15999,"weight":4536,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/4935_l.jpg?v=1481834788"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/4935_l.jpg?v=1481834788","options":["Title"],"media":[{"alt":null,"id":117680177217,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/4935_l.jpg?v=1568798864"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/4935_l.jpg?v=1568798864","width":600}],"content":"\u003cp\u003e\u003cspan\u003eRelocate your shock mounts and get the lift need for tighter suspension and larger mud tires! Our lift consistently measures truer (and higher) than the competition!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFits: \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e2016 Can-Am Commander 800\u003cbr\u003e2016 Can-Am Commander 800 DPS\u003cbr\u003e2016 Can-Am Commander 1000 DPS\u003cbr\u003e2016 Can-Am Commander 800 XT\u003cbr\u003e2016 Can-Am Commander 1000 XT\u003cbr\u003e2016 Can-Am Commander 1000 XT-P\u003cbr\u003e2016 Can-Am Commander 1000 LTD\u003cbr\u003e2015 Can-Am Commander 800\u003cbr\u003e2015 Can-Am Commander 800 DPS\u003cbr\u003e2015 Can-Am Commander 800 XT\u003cbr\u003e2015 Can-Am Commander 1000 DPS\u003cbr\u003e2015 Can-Am Commander 1000 XT\u003cbr\u003e2015 Can-Am Commander 1000 XT-P\u003cbr\u003e2015 Can-Am Commander 1000 LTD\u003cbr\u003e2017 Can-Am Commander 1000 DPS\u003cbr\u003e2017 Can-Am Commander 1000 LTD\u003cbr\u003e2017 Can-Am Commander 1000 XT\u003cbr\u003e2017 Can-Am Commander 1000 XT-P\u003cbr\u003e2017 Can-Am Commander 800\u003cbr\u003e2017 Can-Am Commander 800 DPS\u003cbr\u003e2017 Can-Am Commander 800 XT\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBigger. Badder. BOLDER. Take your ATV to the edge with High Lifter’s 2” Lift Kit. Increase your ground clearance and make room for larger tires to dig deep and ride hard in most any terrain. Our engineers and staff have spent over 20 years perfecting the ultimate ATV lift kit. The product? An easy-to-install, bolt-on lift that consistently measures truer over competitor products.\u003cbr\u003e\u003cbr\u003eThe High Lifter 2” Lift Kit relocates the shock mounts to provide additional lift making room for larger tires and tightens suspension. Each Lift Kit part is precision cut and zinc plated for durability and reliability in any environment.\u003cbr\u003e2” Signature Series Lift Kit Features:\u003cbr\u003e· All hardware needed for successful installation \u003cbr\u003e· User-friendly instructions\u003cbr\u003e· Bolt-on application; takes approximately 1-2 hours for install\u003cbr\u003e· Zinc plated\u003cbr\u003e· Front and rear lift\u003cbr\u003e\u003cbr\u003eNOTE: Does not fit Can-Am Commander 1000X model with Fox Shocks.\u003c\/span\u003e\u003c\/p\u003e"}
High Lifter Series Lift Kit Can-Am Commander 800/1000

High Lifter Series Lift Kit Can-Am Commander 800/1000

CLK1000C-51

$ 159.99

Relocate your shock mounts and get the lift need for tighter suspension and larger mud tires! Our lift consistently measures truer (and higher) than the competition! Fits:  2016 Can-Am Commander 8002016 Can-Am Commander 800 DPS2016 Can-Am Commander 1000 DPS2016 Can-Am Commander 800 XT2016 Can-Am Commander 1000 XT2016 Can-Am Commander 1000 XT-P20...


More Info
High Lifter Snorkel Can-Am Maverick 1000
SNORK-C1M

Intake

$ 359.99
{"id":8613981069,"title":"High Lifter Snorkel Can-Am Maverick 1000","handle":"high-lifter-snorkel-can-am-maverick-1000","description":"\u003cp\u003e\u003cspan\u003eHigh Lifter makes the highest quality and most comprehensive snorkel kit in the ATV industry. Our High Lifter Snorkels are the best looking and most professional appearing kits on the market. From fit to finish, to the level of detail, our kits are not only built to work, they are built to look good while doing it. There are no returns or refunds on any brand of snorkel.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis Diver Down Snorkel kit contains everything you need to properly snorkel your ride.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e2013 C\u003c\/span\u003e\u003cspan\u003ean-Am Maverick 1000 Xrs\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2013 Can-Am Maverick 1000\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2013 Can-Am Maverick 1000 XRS\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eCustom Powder Coated Riser Bracket to keep risers straight, evenly spaced and looking good\u003cbr\u003eRubber Grommets to hold riser tubes in place\u003cbr\u003e1 1\/2\", 2\" or 3\" Risers- based on specific model\u003cbr\u003eHeavy Duty Vinyl Tubing to route difficult locations where the competition uses think tubing\u003cbr\u003eHigh Heat Silicon Hose in those critical areas where the competition melts\u003cbr\u003eBellows to keep water out of differentials and transmission\u003cbr\u003eAll mounting hardware for complete installation\u003cbr\u003eStep-by-step instructions complete with detailed photos\u003cbr\u003e\u003cstrong\u003eBenefits:\u003c\/strong\u003e\u003cbr\u003eProvides clean, dry air to the engine and other parts needing venting\u003cbr\u003ePrevents mud, water and debris from entering the engine and clutch housings when equipped\u003cbr\u003eBellows allow the differential and transmission air to expand and contract without the need for long vent lines that can easily get plugged with mud or be pulled off\u003cbr\u003eEach Kit is engineered and cut to fit your specific application\u003cbr\u003e\u003cstrong\u003eFAQ:\u003c\/strong\u003e\u003cbr\u003eWhy Snorkel? Simply put – The right snorkel can be the best insurance you buy for your ATV or UTV. The right snorkel can protect you expensive investment from disaster when submerged deeper than OE rated water depth. On the other hand, the wrong snorkel can be your worst investment and nightmare. We’ve seen countless units come through our shop with leaking snorkels.\u003cbr\u003eHow could that happen? Snorkels leak for a variety of reasons. Installation errors account for a lot these. Many times a do-it-yourselfer may get it right, but only for a short time. When pipes aren’t cut to correct length and things don’t line up quite right, many times the snorkel will prevent water, but only for a limited time, then the joint fails. One of the most common that we’ve seen is failure due to a heat source. When the snorkel runs close to heat source the snorkel material deteriorates during each ride. The material gets harder and more brittle and many times begins to deform. At some point the material cracks and begins to let mud and water in. Less expensive kits rarely provide the heat resistant material to account for this. Our goal is to avoid these areas. This can take more time and more material, but goes a long way to extending the life of the snorkel and the ATV\/UTV.\u003cbr\u003eWhat does a Snorkel do? A snorkel kit is intended to provide clean, dry air to the engine and other parts needing venting on ATVs\/UTVs such as clutches, differentials, transmission, carburetors and fuel tanks. This doesn’t necessarily mean the ATV\/UTV should exceed the OE manufacturer’s stated maximum rated water line depth. The snorkel kit is intended as additional margin of protection in the event that the ATV\/UTV is inadvertently driven into water deeper than the OE manufacturer’s air intakes will tolerate. There are many considerations to make when increasing water line depth and a snorkel is just one component.\u003cbr\u003eWe know a little about taking off-road vehicles to the extreme - especially when it comes to deep water and mud. Trust us to protect your ride from deep water hazards with Diver Down Snorkels by High Lifter Products.\u003c\/span\u003e\u003c\/p\u003e","published_at":"2016-12-15T14:31:00-06:00","created_at":"2016-12-15T14:33:09-06:00","vendor":"High Lifter","type":"Intake","tags":["Make_Can-Am","Model_Maverick","Model_Maverick 1000","Parts_Accessories","Parts_Snorkels","Year_2013"],"price":35999,"price_min":35999,"price_max":35999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29495900429,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SNORK-C1M","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"High Lifter Snorkel Can-Am Maverick 1000","public_title":null,"options":["Default Title"],"price":35999,"weight":6804,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/4670_l.jpg?v=1481833991"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/4670_l.jpg?v=1481833991","options":["Title"],"media":[{"alt":null,"id":117677752385,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/4670_l.jpg?v=1568798863"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/4670_l.jpg?v=1568798863","width":600}],"content":"\u003cp\u003e\u003cspan\u003eHigh Lifter makes the highest quality and most comprehensive snorkel kit in the ATV industry. Our High Lifter Snorkels are the best looking and most professional appearing kits on the market. From fit to finish, to the level of detail, our kits are not only built to work, they are built to look good while doing it. There are no returns or refunds on any brand of snorkel.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis Diver Down Snorkel kit contains everything you need to properly snorkel your ride.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e2013 C\u003c\/span\u003e\u003cspan\u003ean-Am Maverick 1000 Xrs\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2013 Can-Am Maverick 1000\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2013 Can-Am Maverick 1000 XRS\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eCustom Powder Coated Riser Bracket to keep risers straight, evenly spaced and looking good\u003cbr\u003eRubber Grommets to hold riser tubes in place\u003cbr\u003e1 1\/2\", 2\" or 3\" Risers- based on specific model\u003cbr\u003eHeavy Duty Vinyl Tubing to route difficult locations where the competition uses think tubing\u003cbr\u003eHigh Heat Silicon Hose in those critical areas where the competition melts\u003cbr\u003eBellows to keep water out of differentials and transmission\u003cbr\u003eAll mounting hardware for complete installation\u003cbr\u003eStep-by-step instructions complete with detailed photos\u003cbr\u003e\u003cstrong\u003eBenefits:\u003c\/strong\u003e\u003cbr\u003eProvides clean, dry air to the engine and other parts needing venting\u003cbr\u003ePrevents mud, water and debris from entering the engine and clutch housings when equipped\u003cbr\u003eBellows allow the differential and transmission air to expand and contract without the need for long vent lines that can easily get plugged with mud or be pulled off\u003cbr\u003eEach Kit is engineered and cut to fit your specific application\u003cbr\u003e\u003cstrong\u003eFAQ:\u003c\/strong\u003e\u003cbr\u003eWhy Snorkel? Simply put – The right snorkel can be the best insurance you buy for your ATV or UTV. The right snorkel can protect you expensive investment from disaster when submerged deeper than OE rated water depth. On the other hand, the wrong snorkel can be your worst investment and nightmare. We’ve seen countless units come through our shop with leaking snorkels.\u003cbr\u003eHow could that happen? Snorkels leak for a variety of reasons. Installation errors account for a lot these. Many times a do-it-yourselfer may get it right, but only for a short time. When pipes aren’t cut to correct length and things don’t line up quite right, many times the snorkel will prevent water, but only for a limited time, then the joint fails. One of the most common that we’ve seen is failure due to a heat source. When the snorkel runs close to heat source the snorkel material deteriorates during each ride. The material gets harder and more brittle and many times begins to deform. At some point the material cracks and begins to let mud and water in. Less expensive kits rarely provide the heat resistant material to account for this. Our goal is to avoid these areas. This can take more time and more material, but goes a long way to extending the life of the snorkel and the ATV\/UTV.\u003cbr\u003eWhat does a Snorkel do? A snorkel kit is intended to provide clean, dry air to the engine and other parts needing venting on ATVs\/UTVs such as clutches, differentials, transmission, carburetors and fuel tanks. This doesn’t necessarily mean the ATV\/UTV should exceed the OE manufacturer’s stated maximum rated water line depth. The snorkel kit is intended as additional margin of protection in the event that the ATV\/UTV is inadvertently driven into water deeper than the OE manufacturer’s air intakes will tolerate. There are many considerations to make when increasing water line depth and a snorkel is just one component.\u003cbr\u003eWe know a little about taking off-road vehicles to the extreme - especially when it comes to deep water and mud. Trust us to protect your ride from deep water hazards with Diver Down Snorkels by High Lifter Products.\u003c\/span\u003e\u003c\/p\u003e"}
High Lifter Snorkel Can-Am Maverick 1000

High Lifter Snorkel Can-Am Maverick 1000

SNORK-C1M

$ 359.99

High Lifter makes the highest quality and most comprehensive snorkel kit in the ATV industry. Our High Lifter Snorkels are the best looking and most professional appearing kits on the market. From fit to finish, to the level of detail, our kits are not only built to work, they are built to look good while doing it. There are no returns or refund...


More Info
High Lifter Snorkel Can-Am Maverick 1000
SNORK-C1M-1

Intake

$ 429.99
{"id":8614007629,"title":"High Lifter Snorkel Can-Am Maverick 1000","handle":"high-lifter-snorkel-can-am-maverick-1001","description":"\u003cp\u003e\u003cspan\u003eHigh Lifter makes the highest quality and most comprehensive snorkel kit in the ATV industry. Our High Lifter Snorkels are the best looking and most professional appearing kits on the market. From fit to finish, to the level of detail, our kits are not only built to work, they are built to look good while doing it. There are no returns or refunds on any brand of snorkel.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis Diver Down Snorkel kit contains everything you need to properly snorkel your ride.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e2016 Can-Am Maverick 1000\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2016 Can-Am Maverick 1000 DPS\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2016 Can-Am Maverick 1000 XXC\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2014 Can-Am Maverick 1000\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2014 Can-Am Maverick 1000 XRS\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2014 Can-Am Maverick 1000 XRS-DPS\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2014 Can-Am Maverick 1000 XXC\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2015 Can-Am Maverick 1000\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2015 Can-Am Maverick 1000 XRS-DPS\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2015 Can-Am Maverick 1000 XXC-DPS\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2015 Can-Am Maverick 1000 XRS\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2017 Can-Am Maverick 1000 DPS\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2017 Can-Am Maverick 1000 XXC\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eCustom Powder Coated Riser Bracket to keep risers straight, evenly spaced and looking good\u003cbr\u003eRubber Grommets to hold riser tubes in place\u003cbr\u003e1 1\/2\", 2\" or 3\" Risers- based on specific model\u003cbr\u003eHeavy Duty Vinyl Tubing to route difficult locations where the competition uses think tubing\u003cbr\u003eHigh Heat Silicon Hose in those critical areas where the competition melts\u003cbr\u003eBellows to keep water out of differentials and transmission\u003cbr\u003eAll mounting hardware for complete installation\u003cbr\u003eStep-by-step instructions complete with detailed photos\u003cbr\u003e\u003cstrong\u003eBenefits:\u003c\/strong\u003e\u003cbr\u003eProvides clean, dry air to the engine and other parts needing venting\u003cbr\u003ePrevents mud, water and debris from entering the engine and clutch housings when equipped\u003cbr\u003eBellows allow the differential and transmission air to expand and contract without the need for long vent lines that can easily get plugged with mud or be pulled off\u003cbr\u003eEach Kit is engineered and cut to fit your specific application\u003cbr\u003e\u003cstrong\u003eFAQ:\u003c\/strong\u003e\u003cbr\u003eWhy Snorkel? Simply put – The right snorkel can be the best insurance you buy for your ATV or UTV. The right snorkel can protect you expensive investment from disaster when submerged deeper than OE rated water depth. On the other hand, the wrong snorkel can be your worst investment and nightmare. We’ve seen countless units come through our shop with leaking snorkels.\u003cbr\u003eHow could that happen? Snorkels leak for a variety of reasons. Installation errors account for a lot these. Many times a do-it-yourselfer may get it right, but only for a short time. When pipes aren’t cut to correct length and things don’t line up quite right, many times the snorkel will prevent water, but only for a limited time, then the joint fails. One of the most common that we’ve seen is failure due to a heat source. When the snorkel runs close to heat source the snorkel material deteriorates during each ride. The material gets harder and more brittle and many times begins to deform. At some point the material cracks and begins to let mud and water in. Less expensive kits rarely provide the heat resistant material to account for this. Our goal is to avoid these areas. This can take more time and more material, but goes a long way to extending the life of the snorkel and the ATV\/UTV.\u003cbr\u003eWhat does a Snorkel do? A snorkel kit is intended to provide clean, dry air to the engine and other parts needing venting on ATVs\/UTVs such as clutches, differentials, transmission, carburetors and fuel tanks. This doesn’t necessarily mean the ATV\/UTV should exceed the OE manufacturer’s stated maximum rated water line depth. The snorkel kit is intended as additional margin of protection in the event that the ATV\/UTV is inadvertently driven into water deeper than the OE manufacturer’s air intakes will tolerate. There are many considerations to make when increasing water line depth and a snorkel is just one component.\u003cbr\u003eWe know a little about taking off-road vehicles to the extreme - especially when it comes to deep water and mud. Trust us to protect your ride from deep water hazards with Diver Down Snorkels by High Lifter Products.\u003c\/span\u003e\u003c\/p\u003e","published_at":"2016-12-15T14:31:00-06:00","created_at":"2016-12-15T14:37:14-06:00","vendor":"High Lifter","type":"Intake","tags":["Make_Can-Am","Model_Maverick","Model_Maverick 1000","Parts_Accessories","Parts_Snorkels","Year_2014","Year_2015","Year_2016","Year_2017"],"price":42999,"price_min":42999,"price_max":42999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29496003789,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SNORK-C1M-1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"High Lifter Snorkel Can-Am Maverick 1000","public_title":null,"options":["Default Title"],"price":42999,"weight":6804,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"continue","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/4719_l.jpg?v=1481834256"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/4719_l.jpg?v=1481834256","options":["Title"],"media":[{"alt":null,"id":117678473281,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/4719_l.jpg?v=1568798863"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0835\/6831\/products\/4719_l.jpg?v=1568798863","width":600}],"content":"\u003cp\u003e\u003cspan\u003eHigh Lifter makes the highest quality and most comprehensive snorkel kit in the ATV industry. Our High Lifter Snorkels are the best looking and most professional appearing kits on the market. From fit to finish, to the level of detail, our kits are not only built to work, they are built to look good while doing it. There are no returns or refunds on any brand of snorkel.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis Diver Down Snorkel kit contains everything you need to properly snorkel your ride.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e2016 Can-Am Maverick 1000\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2016 Can-Am Maverick 1000 DPS\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2016 Can-Am Maverick 1000 XXC\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2014 Can-Am Maverick 1000\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2014 Can-Am Maverick 1000 XRS\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2014 Can-Am Maverick 1000 XRS-DPS\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2014 Can-Am Maverick 1000 XXC\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2015 Can-Am Maverick 1000\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2015 Can-Am Maverick 1000 XRS-DPS\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2015 Can-Am Maverick 1000 XXC-DPS\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2015 Can-Am Maverick 1000 XRS\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2017 Can-Am Maverick 1000 DPS\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2017 Can-Am Maverick 1000 XXC\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eCustom Powder Coated Riser Bracket to keep risers straight, evenly spaced and looking good\u003cbr\u003eRubber Grommets to hold riser tubes in place\u003cbr\u003e1 1\/2\", 2\" or 3\" Risers- based on specific model\u003cbr\u003eHeavy Duty Vinyl Tubing to route difficult locations where the competition uses think tubing\u003cbr\u003eHigh Heat Silicon Hose in those critical areas where the competition melts\u003cbr\u003eBellows to keep water out of differentials and transmission\u003cbr\u003eAll mounting hardware for complete installation\u003cbr\u003eStep-by-step instructions complete with detailed photos\u003cbr\u003e\u003cstrong\u003eBenefits:\u003c\/strong\u003e\u003cbr\u003eProvides clean, dry air to the engine and other parts needing venting\u003cbr\u003ePrevents mud, water and debris from entering the engine and clutch housings when equipped\u003cbr\u003eBellows allow the differential and transmission air to expand and contract without the need for long vent lines that can easily get plugged with mud or be pulled off\u003cbr\u003eEach Kit is engineered and cut to fit your specific application\u003cbr\u003e\u003cstrong\u003eFAQ:\u003c\/strong\u003e\u003cbr\u003eWhy Snorkel? Simply put – The right snorkel can be the best insurance you buy for your ATV or UTV. The right snorkel can protect you expensive investment from disaster when submerged deeper than OE rated water depth. On the other hand, the wrong snorkel can be your worst investment and nightmare. We’ve seen countless units come through our shop with leaking snorkels.\u003cbr\u003eHow could that happen? Snorkels leak for a variety of reasons. Installation errors account for a lot these. Many times a do-it-yourselfer may get it right, but only for a short time. When pipes aren’t cut to correct length and things don’t line up quite right, many times the snorkel will prevent water, but only for a limited time, then the joint fails. One of the most common that we’ve seen is failure due to a heat source. When the snorkel runs close to heat source the snorkel material deteriorates during each ride. The material gets harder and more brittle and many times begins to deform. At some point the material cracks and begins to let mud and water in. Less expensive kits rarely provide the heat resistant material to account for this. Our goal is to avoid these areas. This can take more time and more material, but goes a long way to extending the life of the snorkel and the ATV\/UTV.\u003cbr\u003eWhat does a Snorkel do? A snorkel kit is intended to provide clean, dry air to the engine and other parts needing venting on ATVs\/UTVs such as clutches, differentials, transmission, carburetors and fuel tanks. This doesn’t necessarily mean the ATV\/UTV should exceed the OE manufacturer’s stated maximum rated water line depth. The snorkel kit is intended as additional margin of protection in the event that the ATV\/UTV is inadvertently driven into water deeper than the OE manufacturer’s air intakes will tolerate. There are many considerations to make when increasing water line depth and a snorkel is just one component.\u003cbr\u003eWe know a little about taking off-road vehicles to the extreme - especially when it comes to deep water and mud. Trust us to protect your ride from deep water hazards with Diver Down Snorkels by High Lifter Products.\u003c\/span\u003e\u003c\/p\u003e"}
High Lifter Snorkel Can-Am Maverick 1000

High Lifter Snorkel Can-Am Maverick 1000

SNORK-C1M-1

$ 429.99

High Lifter makes the highest quality and most comprehensive snorkel kit in the ATV industry. Our High Lifter Snorkels are the best looking and most professional appearing kits on the market. From fit to finish, to the level of detail, our kits are not only built to work, they are built to look good while doing it. There are no returns or refund...


More Info