20-22 X3 120HP to 205HP COMPLETE Upgrade Kit X3 Big Core Intercooler Kit + TUNER ^{GREAT DEAL}

• CAN AM X3 INTERCOOLER OVERRIDE SWITCH
• 
  

• Fits all 2017 and newer Can Am X3 Turbo Models
• This will override your intercooler fan settings programmed into the ECU with the switch in place
• When switch is not on, fan will operate normal off ECU settings
• A must have for 120hp base X3 models when upgrading to the intercooler/fan as the ECU will not control the fan and it needs to be done manually with this switch
• Plug and play design

?ß

• CAN AM X3 S2 CLUTCH KIT
• S2 X3 clutch kits pack a huge punch! ?ßNo matter the terrain, they hit hard and just keep pulling for days. ?ßOn the trail or at the race you'll notice wicked acceleration and instant clutch response when getting back into the throttle after hammering that corner. ?ßIn the dunes you'll see the same benefits, but also have much less bogging when climbing that big dune. ?ßThe machine will hold RPM so you can get where you need to go, and get there faster! ?ßGoing mudding? ?ßOur mud setup will help turn those tires through the thick and deep with much better RPM and wheel speed that's key to climbing out of that hole. Are you a rock crawler? ?ßOur smooth engagement and precise feel down low will give you the confidence to tackle any obstacle. ?ßWe have a huge amount of CVT knowledge, a great passion for the sport, and spent many hours testing different setups in the real world. ?ßWe know you'll be extremely pleased with the performance gain from our clutch kits!?ß?ß
• ?ßBig performance gains as these 3 cylinder motors love to rev! ?ßThe factory clutches these heavy, making them ramp up RPM slowly. ?ßOnce you ride a properly clutched X3 that ramps up RPM quickly, you'll see the major difference.?ß
• S2 kits include our AA Recoil magnetic adjustable clutch weights, our primary spring & setup guideline.?ß?ß
• Our setup guideline will let you know how to set your weights for stock horsepower to 200rwhp, 28" - 32" tires, 28-32" paddle tires, different altitudes & more.
• Fully adjustable magnetic weights are easy to use,?ß ?ßWeights have more tip weight and act heavier. ?ßThis means they also accelerate and up shift much harder.
• A must have when changing tires, tuning your machine, or running paddles
• Cooler running belt temps from a more efficient power transfer which results in longer belt and clutch life.?ß ?ß
• Big acceleration gains an better power transfer to the rear wheels.
• Close to stock engagement which is very smooth (Higher engagement springs available if needed)
• Select your exact year/model which lets us know what weights to send you as the clutch casting is different between some years and models. ?ß2017 X3's and 2018 120HP Base X3's (Kit 108-1008-A) use the same casting, while 2018+ 172HP Base X3's along with 2019+ 120HP (Kit 108-1008-B) use the new style clutch casting. ?ßThis is a very minor change, but our weights needed slight modification to work. ?ßIf you upgraded your older style casting to a new one, please let us know in the order notes.
• Our Recoil clutch weights are easily adjustable with simple magnets. ?ßThey have a custom AA profile, the BEST coating on the market(nitrocarburizing) which has increased wear resistance, improved fatigue strength, and added surface lubricity. These clutch weights also offer great performance, and the ability to tune for many different applications or modification in the future, without the need to buy extra parts. ?ßThe magnetic weights are the best option to properly place the mass where we need it on the weight for best performance for your application.
• Clutch compression tool and clutch puller are needed to install this clutch kit.?ß
• We found the stock secondary clutch to work very well. ?ßOnce we have helixes available, you'll see our S3 clutch kits come out with the helix/spring.
• Target peak RPM for stock or any other tune with the rev limit set between 8300-8700 RPM is 7700-7900 RPM. ?ßFor AA tunes and other tunes with an 8800-9000 RPM rev limit, target should be 7900-8300. ?ßTesting should be done on a somewhat level ground from a 10-20mph roll on to full WOT and RPM checked as passing by 55-60MPH.