- XMR - All years & models
- Billet Differential - QTY 1
- Box Dimensions: 12x12x12 DW
- Weight: 24.0 lbs.
No Installation Guide Exists
Must have upgrade
Very impressed from packaging to install.
Front seal leaks
Diff is high quality!Gears feel
Diff is high quality!Gears feel tight and very smooth.This should be the fix for my high failure rate on stock diff’s.
QUESTIONS & ANSWERSAsk a Question
Hi What reduction ratios are available? What's the rated torque and maximum rpm? Thanks John
Hello, All Can Am differentials front and rear for all units that match there specific year, make , model units all match each other in gear ratio. The only way to change gear ratios are the small gear box, large gear box, or trans axel. The units can only have the internals swapped out or the entire gear box also commonly referred to as the transmission swapped out.
Does this application work on a 2018 can-am defender xmr 1000
Hey Mike, No sir the Defenders run the transaxle setup here.
Does this fit 2016 commander 800
Jim, this fits all years and models as long as it's an XMR.
Will this for a 19 outlander 650
Hi there. From the diagram, it appears your unit runs the XMR rear diff, so yes if thats the case then this Billet XMR diff should bolt right in.
Are these rear differentials quieter than the factory can am commander rear diff? My 2012 has whined since new. Thanks Larry
This differential has no gear whine. Straight cut gears like your differential are known to be louder, we have not heard any stargiht cut whine that were setup properly. The gears in this diffrential are spiral bevel gears they are the strongest and quitest cut style of gears.
I have a 2016 can am outlander xmr1000. This will fit? I will like also the rear drive shaft for him
Hi, please submit a tech form so we can get some more information about your set up as well as what you're wanting to do. The form can be found here: https://www.warrantykillerperformance.com/pages/tech
Can you lock and unlock your rear diff
Hey Don, All Can Am's with a seprate differantial from the transmission have a spool for a ring gear. I know this is confusing as a differential normally lets the wheels operate at different speeds when turnng etc. However this is not the case with all Can Am rear differentials they do not lock and unlock.
Is it possible to get a longer warranty if you still have a stock machine?
Can Am does not offer warranty with stock rear differentials. If you choose the HD Series, then we back that with a 1 yr warranty. If you're asking about the warranty on this Billet XMR Rear Diff then we offer a 1-year warranty on the gear set and a lifetime warranty on the gear case.
Does this diff fit in a 2017 xmr 1000 renegade?
Please refer to fitment tab.
Do you have a rear billet diff in stock for my outlander 1000 xtp 2014 g2
Theses units are built to order. We can expedite sometimes. Please email us!
Will this fit a 2012 renegade 1000
Yes it will bought wiht the full conversion kit.
Will this fit 2015 can am outlander 1000 xmr
Yes it will.
Is this diff stronger than the factory diff? I have a 2015 xmr 800 outlander with a big lift and 33s tires.
Zero Failures to date through our shop!
Does this fit a xmr outlander 800 2015 I have 33s on it and my stock diff went out will this be better for bigger tires ? Thanks
Hey Cooper, yes this difirential is the strongst on the matrket. This is what it is degined for large tire high HP setups.
Will this rear diff fit in a 2008 canam 800 outlander
Hey Tommy, yes sir it will using this kit.
Do you have a diff in stock? For a 2018 can am renegade 1000 xmr. If not how long would it be to get one
Hey Richard, This diff is high demand and stays on a 4 week build time. As fast as the mahcine shop can crank them out and us build them we cant ever catch up to the demand. So we ask everyone to place the oprder to be out in line.
Does this diff solves the water issues that alot of us deal with with our unit, and if not will y'all warranty this diff if it fails from water damage?
Hey Sherman, The OEM diff does not have water issues that we are aware of. The OEM seals and vent will keep any fluids out. No matter how well built the diff is, none will last if they are not maintenced. Water would not be covered under warranty as it would make any diff fail when contaminatiing the oil.
Do you have any of The can am billet diffs in stock?
This is a built to order item because of the demand we are always 3-4 weeks out. Placing your order puts you in line.