Vendor: Super ATV AUTHORIZED DEALER
Type: Drivetrain
Part #: PGH6D-3-83-302-B-FS
Lead Time: Contact Us
Lead Time: Contact Us
Lead Time: Contact Us
Lead Time: Contact Us
Lead Time: Contact Us
Lead Time: Contact Us
Lead Time: Contact Us
Lead Time: Contact Us
Wheel Requirements:
GDP Portals Can’t Be Beat
At SuperATV, we don’t put anyone in a box. That’s why our Gen 3 portals are all about giving you options. Get our 6” Portal Gear Lift for your Honda Talon 1000R and you get to tell us how much gear reduction you want and what kind of housings you get. Because of this, we’ve got something for everyone. Choose a 30%, 45%, or 60% gear reduction and opt for dual idler gears to boost your strength. We have the options that make GDP perfect for you.
What is a Dual Idler?
Perfection takes time. After years of research and development, we’ve made our dual idler gear portals unlike any other. By placing a second idler gear in the portal box, the load gets spread over twice as much surface area for more reliable torque transfer and the strongest gear set you can get. Two idler gears don’t do a thing if they’re not mated perfectly, though. Precision CNC grinding ensures ours do. Our gears are made from the industry’s toughest 9310 steel alloy. Didn’t think dual idlers mattered? With GDP’s quality and experience, they finally do.
Great for Any Rider
If you’re all about going big with massive tires and tons of power, our 45% or 60% gear reductions are perfect for you. If you’re wanting to fly through trails with plenty of punchy torque, go with a 30% reduction. No matter what you choose, you can’t go wrong with GDP.
A Gear Reduction That Protects Your Drivetrain
Portal gear lifts put the gear reduction directly in the hub, so you don’t have to worry about any unnecessary stress being placed on your drivetrain. Because of this, your differential, prop shaft, axles, and transmission can do their job without acquiring any early wear and tear. This lets you do more and ride harder without worrying about your machine’s most vital parts.
The Strongest Portals Around
Cutting corners isn’t in our nature—especially when it comes to strength. We’ve put in years of research to ensure that you’re getting the strongest portals possible. You get to pick between cast or billet aluminum aluminum housings that take advantage of our 5/16” advanced steel backing plates. No matter which direction you go, you’re getting portals that are second to none.
Advanced Gaskets, Seals, and Bearings
Our portals use:
Bolster Your UTV with a Frame Stiffener
The Honda Talon 1000R doesn’t like to take it slow and neither do you. If you load it up with 6” GDP Portals and some monster tires, you can bend your frame. That’s why we highly recommend a frame stiffener. It bolsters your frame, so you can ride however you want.
Top-Rated Customer Service
Still need a little help getting exactly what you need? We’ve got a dedicated team just for portal support. Give us a call so we can get the perfect set of portals in your hands today.
6” Portal Gear Lift Includes:
(4) Assembled portal hub boxes complete with 9310 gears, seals, output shaft, Thermo-Tork® gaskets, and thrust bearings
(4) Universal hubs and precision-ground stainless steel slotted rotors with lugs
(4) Specialized steel alloy backing plates
(4) Steel caliper mounting plates with spacers
(8) Caliper mounting plate shims
(2) Steel steering arms
(2) Rear adapter plates
(2) Preinstalled lower ball joints
Extended brake lines
All required hardware, including recessed castle nut socket
Frame stiffener (must select at checkout)
Honda Talon 1000R Portal Gear Reduction Recommendations | ||
---|---|---|
Max Tire Size | Required Suspension Setup with 6” Portals | |
38" | Stock | |
38" | 1.5" High Clearance A-Arms | |
40" | 3" Lift Kit | |
40" | 1.5" High Clearance A-Arms and 3" Lift Kit | |
If you need help figuring out which gear reduction is right for you, check out our portal gear reduction calculator. | ||
Max tire sizes are measured at full compression and full turn. The given tires sizes are the largest we fit without rubbing. With minor trimming or a small amount of rub, larger tire sizes can be used. |
NOTE: Wheels need to have a center hole of at least 3.25" (82.55mm) or require a 1” wheel spacer.
SuperATV takes pride keeping your GDP Portal Gear Lift in working order. That’s why we give you, the original purchaser, a lifetime of portal protection contingent on the following conditions. SuperATV warrants this product and its parts (excluding bearings, seals, & gaskets). Warranty is limited to material and / or workmanship defect at the time of shipment from the factory, and in no event shall seller have any liability for consequential damages of any kind resulting from a breach of this warranty. This warranty will be void on all products that show evidence of misapplication, improper installation, abuse, lack of proper maintenance, negligence, or alteration from original design. This warranty is in lieu of any other warranties, either expressed or implied, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTIBILTY OR FITNESS FOR ANY PARTICULAR PURPOSE.
Procedures for obtaining warranty service:
Should you have any problems with your Gear Driven Performance product, please call SuperATV Customer Service at 855-743-3427. Please have a copy of your original purchase receipt available, with dealer name (if applicable), date of purchase, and invoice number when calling for technical help. Most often, installation, or break in procedural issues (See break in procedure information, located in the instructions) can be handled quickly by speaking with one of our customer service representatives.
If it is determined that repairs are required to your Gear Driven Performance portal, you MUST acquire an RGA number from our customer service team. RGA's and repair services are ONLY rendered by SuperATV. Any shipping costs incurred after 30 days (starting from the original purchase date) on any Portal returned for repair is the customer's responsibility. ALL Portals must be returned in the original box, with the original packaging, or a similarly well protected box. ALL portals must have the RGA number clearly written on the outside of the package. NO COD packages will be accepted, and no package will be accepted without an RGA number written on the outside of the box. Shipping information, including address and method, will be given to you by our customer service team and/or listed on our website when you create your RGA.
Upon arrival of your warranty parts we will have them inspected by our technicians to determine if the damage was a manufacturing defect or rider/installation error. The inspection usually takes place 1-2 days after the package arrives. SuperATV will then call you with the results of the inspection. Depending on the outcome of the inspection, you may be required to pay a replacement fee for the broken parts (prices may vary depending on parts that need to be replaced). We do our best to get your issues corrected as soon as possible so you can get back out on the trails. We also match shipping labels for our customers. If you ship the warranty parts to us with an overnight label, we will return the favor and send you the replacements parts on an overnight shipment at no charge.
If you have product that is outside of warranty coverage or it is determined that product shows evidence of misapplication, improper installation, abuse, lack of proper maintenance, negligence, or alteration from original design. Customer will be notified and we will repair for a $250 fee.
Replacement bearings, seals and gaskets can be found at www.SuperATV.com.
Thank you for your business!