- All models (Except Defender, Maverick X3 and Maverick Trail)
- Secondary Clutch - QTY 1
- Box Dimensions: 14x14x14
- Weight: 20.0 lbs.
No Installation Guide Exists
So far it is performing great.
Perfectly calibrated for the way I ride. No complaints. Bu with anything time will tell.
QUESTIONS & ANSWERSAsk a Question
Is this secondary clutch a direct replacement for my stock secondary on a 2015 Can Am Commander 1000 without any modifications?
That is correct this is a correctly WKP calibrated secondary clutch performance upgrade ready to bolt on. However your unit and many other Can Am units run an OEM priamry that is not locked, that is usally swapped out for our WKP calibrated primary. That would be the correct first step to upgrading the OEM clutching. The primary can slip with stock tires in normal conditions before the stock secondary fails to operate properly. This proplerly setup for your unit will take some load of the stock primary but its advised to do both or priamry in near future as well if budget allows. Please mail us here and lets u know the reason for upgrading or if you have any further qustions.
I have a 2020 Can am Outlander XTP 1000r. I can’t stand the Can Am secondary clunk, what will fix this until I get money for a stm pri/sec?
Yes sir thats correct as the helix is encalpsalated and can not move away from the roller to clunk back and fourth from drive to coast.
Will this fit 2014 can am maverick 1000r with a stock primary?
I have a 2017 Can Am Outlander Max 650 with a 360 track kit, running at 10,000 Ft elevation, stock primary, can you send it tuned for this application?
What hardware device do you have to send a data log? We would need a log from a PCV with AFR refernce and yes we could remote tune.
Does this secondary come with a helix and a spring? I am using 31" tires
All prodcuts come with excatly whats in photos. yes sir.
Will this secondary work with cvtech trailblok primary
yes it will, this is stock clutch alingment. The cvtech runs stock clutch alingment.
I see you have a "riding style" drop down box. Will this STM secondary come configured with the proper spring and helix for the riding style I choose? Or, is it better to contact you via phone/email to choose correct spring and helix?
Yes sir use the drop down add as much info as you can we will send the unit out calibrated! Thanks!
Will this fit 2015 Outlander 650 xmr what I need to install this as well
Hey mark, yes sir this will fit your application. We do recommend a primary as well. What is your setup and riding style?
Pleas email firstname.lastname@example.org
I need some information on what clutches do I need to upgrade too on my 2018 Can am outlander 570 xmr
Please email us email@example.com
Will this fit a 2014 1000 maverick xxc and is there anything else i need to do to install it?
Yes sir it will. We normally recommend clutch puller, as well as STM primary.
Have a 2015 xmr Maverick 1000 whant to know if it will fit
Hey Emily, yes this is the correct clutch for your maverick.