MoTeC M130 Standalone ECU Kit for Can-Am Maverick X3 Turbo
Take complete control of your Can-Am Maverick X3 with the MoTeC M130 Standalone ECU Kit. This complete standalone engine management solution replaces the factory ECU and provides advanced control over virtually every aspect of engine operation.
Designed specifically for 2017+ Can-Am Maverick X3 Turbo models, the M130 integrates with the factory Can-Am CAN bus to maintain OE vehicle and dash functionality while giving you access to professional-level engine management, data, and tuning capabilities.
The kit includes a startup calibration customized for your vehicle's setup, providing a solid starting point for final tuning.
2021 Model Note: An OEM ECU core is required for 2021 models in order to manufacture the required jumper harness.
What's Included
-
MoTeC M130 ECU
-
Vehicle-specific plug-and-play wiring solution
-
Customized startup calibration
-
DST-4 lead for 4-position, on-the-fly boost control
-
MoTeC LTC lead for lambda feedback via CAN bus
-
Ethernet programming cable
-
12-pin DTM expansion connector with spare inputs and outputs
Additional leads and sensor connections can be added prior to shipping to accommodate your specific build, including fuel pressure, flex fuel, MAP sensors, and more.
Complete Engine Management
The MoTeC M130 gives you or your tuner comprehensive control over critical engine functions, including:
-
Fuel
-
Ignition timing
-
Boost control
-
Launch control
-
Cooling fan operation
-
Lambda control
-
Flex fuel strategies
-
Knock control
-
Nitrous control
-
Water injection
-
Wastegate/CO2 pressure control
-
Staged injection
-
Auxiliary inputs and outputs
Unlike a conventional ECU reflash, the M130 gives your tuner direct access to the engine management system and the data needed to make informed calibration decisions for your exact combination.
OEM CAN Bus Integration
The system provides complete integration with the Can-Am CAN bus, allowing the vehicle to retain OE operation and factory dash functionality while operating on the standalone M130 ECU.
For even greater functionality, pair the system with a MoTeC C125 display and/or MoTeC/Racegrade CAN keypad.
Staged Injection
Support for staged injection allows a second set of fuel injectors to be incorporated into high-horsepower applications or builds utilizing alcohol-based fuels.
Closed-Loop Lambda Control
Closed-loop lambda control is supported when equipped with the appropriate lambda sensor and controller.
The system can also support compatible third-party lambda controllers utilizing a 0–5V output.
Flex Fuel Control
Configure multiple engine parameters according to measured ethanol content, including:
-
Fuel delivery
-
Ignition timing
-
Boost
-
Cold-start strategies
-
Additional calibration parameters
This provides significantly greater control for vehicles operating on varying ethanol concentrations.
Dual Fuel System Support
The M130 can support two independent fuel systems, including configurations where each system contains a different type of fuel.
This makes the system particularly well suited for advanced race and high-horsepower applications.
Launch Control
Configure launch control using vehicle speed or an optional external switch.
Launch strategies can be tailored to the vehicle and application for more consistent launches and improved control.
Nitrous Control
Advanced nitrous-control strategies can be configured using multiple operating parameters.
The system also supports nitrous bottle heater relay control based on nitrous pressure, allowing the ECU to help maintain the desired bottle pressure.
CO2 / Wastegate Pressure Control
Support for fill-and-bleed solenoid configurations allows the M130 to control wastegate pressure using CO2 or other compatible pressure-control systems.
This provides advanced boost-control capability for high-performance and competition applications.
Water Injection Control
Integrated water-injection control can incorporate pressure-sensor feedback and configurable failsafe strategies.
If the system detects inadequate pressure or another configured fault condition, protective strategies can be applied to:
-
Boost
-
Ignition timing
-
Fuel delivery
Knock Control
Advanced knock-control functionality provides additional engine-management capability for properly configured applications.
Cruise / Pit Speed Control
Cruise-control functionality can be configured for applications such as pit-lane speed limiting.
Cooling Fan Control
Take control of cooling-system operation with configurable cooling-fan activation points rather than relying solely on the factory calibration.
Expandable Inputs & Outputs
A 12-pin DTM connector provides spare inputs and outputs, making it easier to integrate additional sensors, switches, solenoids, and other components.
The system also supports:
-
Momentary push buttons
-
MoTeC/Racegrade CAN keypads
-
Additional pressure and temperature sensors
-
Flex fuel sensors
-
Additional MAP sensors
-
Other compatible analog, digital, and CAN-based devices
Built for Serious Tuning
With the MoTeC M130, you or your tuner have direct control over engine operation and access to the data necessary to make informed tuning decisions.
Instead of relying on a preconfigured ECU reflash and hoping the calibration is optimized for your particular combination, the M130 provides a professional engine-management platform that can be configured around your vehicle, modifications, fuel system, and intended use.
Knowledge is power — race and play smart.
Tuning & Technical Support
The MoTeC M1 platform is a professional engine-management system and requires appropriate tuning knowledge and experience to achieve the best results.
We are happy to answer reasonable technical questions regarding the system; however, purchase of this M1 kit does not include unlimited custom tuning or calibration support.
Additional tuning services may be quoted for your particular setup. We can also assist with locating an experienced tuner in your area or provide information regarding training options for customers who wish to perform their own calibration work.
Important Competition-Use Notice
This ECU kit is intended for closed-course competition vehicles only.
This product does not meet federal emissions requirements and is not intended for use on pollution-controlled vehicles operated on public roads or highways.
Product Reviews & Questions/Answers
See what customers are saying about this product.