2017-2019 Can-Am X3 120HP to 170+HP Upgrade kit X3 Big Core Intercooler, Fuel Pump & Silicone

RPM 2017-2019 Can-Am X3 120HP to 170+HP Upgrade kit X3 Big Core Intercooler, Fuel Pump & Silicone

Regular price $ 949.95

Availability: Not Stocked, Supplier Confirmation Required

BRAND RPM SXS

CATEGORY Clutching

PART # UPG-CA-1-BK

Color

Fan Style

DESCRIPTION

RPM 2017-2019 Can-Am X3 120HP to 170+HP Upgrade kit X3 Big Core Intercooler, Fuel Pump & Silicone

Fits 2017-2019 Can-Am X3 Models only

2020+ Models Click Here

If you're doing a upgrade to your 120HP X3 to take it to the next level then this is what you need! Intercooler kit, charge tube kit with BOV, and high pressure fuel pump! If you need a cat delete / down pipe, check out our Can-Am X3 Exhaust Section for all our options!

X3 High Volume FUEL PUMP Assembly

Beginning with the 2018 model year, Can Am has upgraded the fuel pump assembly over the 2017 models. This upgraded pump assembly allows customers to run the powerful and further refined 2018 flashes. We have everything from pump gas to E85 tunes! Please note – you MUST run 2018-2021 ECU programming to run the newer fuel pump assembly. The vehicle will not run correctly without tuning.

RPM Can-Am Maverick X3 Silicone Charge Tubes Kit

A must have upgrade for tuned or high powered machines. This replaces the factory oblong tubes with kinks in them with our durable silicone heat resistant, burst resistant hose. The smooth free flowing design reduces turbulence while increasing airflow efficiency. We have added a boost reference port for boost controller or any boost activated accessory along with a 25mm boost port. Stainless T-bolt clamps for the throttle body, intercooler, and turbo are included! Every charge tube kit comes with our billet/stainless boost reference port for your air box/plenum should you decide to add our Blow Off Valve kit!

Primary and Secondary Charge Tubes
Washable BOV filter
30% More Volume
Manifold Port for Vacuum/Boost Reference
Silicone Reference port line ( 18" )
Simple Bolt On Replacement
Additional Vacuum Port For Boost Reference or Boost Gauge
Stainless Steel HD Clamps
25mm Billet Plug For Not Running a BOV & Boost Leak Testing

RPM Big Core Intercooler

From mild to wild, this intercooler has you covered! A huge improvement over stock with its massive over sized core allows you to stay in peak power for longer and safer! Cooler IAT's and less heat soak equal more power even on 91 octane and less chance of knock. When tested in our deserty sand conditions we were able to maintain up to 50* cooler IAT's!

A great option for the 120hp guys upgrading to 170+ HP tunes that require the need for an intercooler!

Giant deep dish, high volume 10" fan that move 1100 CFM.
Tested to 60 PSI
Retains factory intercooler cover!
Uses factory or factory style charge tubes such as the RPM-SxS Charge Tubes.
60% larger than factory
350+ CFM more air movement than the factory fan
Replaces OEM Part Number: 707800613 (QTY 1)
* This is over sized and requires the plastic edges of where your stock one lays to be slightly trimmed.

Depending on your route of tuning you may be able to utilize the factory Intercooler harness plug, otherwise we offer a manual fan switch giving you control no matter what.

Add a Fan override switch here Can-Am X3 Fan override switch giving YOU full control of your Intercooler fan. The factory fan for the 120hp models will not turn on at all, the 154+hp models ONLY turn on under 80% load.

Compatibility

This part is compatible with 6 vehicle(s)

Year	Make	Model	Trim
2019	Can-Am	Maverick X3	Base 120 HP 2 Seat
2019	Can-Am	Maverick X3	Base 120 HP 4 Seat
2018	Can-Am	Maverick X3	Base 120 HP 2 Seat
2018	Can-Am	Maverick X3	Base 120 HP 4 Seat
2017	Can-Am	Maverick X3	Base 120 HP 2 Seat
2017	Can-Am	Maverick X3	Base 120 HP 4 Seat