THINGS NEEDED
- Windows Laptop
- RTD Flasher Program (Click here to download the RTD Flasher Program)

STEP 1)
Download the .RTD tune file.

STEP 2)
Connect the RTD cable.
Open the RTD flasher software. Plug the micro USB connector into the laptop, and the OBD2 connector into the vehicle's OBD2 port.

*If your vehicle is equipped with the roush active exhaust, the pass-through device must be unplugged from the OBD2 port before plugging the RTD in to pull the .RTD file.*

STEP 3)
Open the tune file.
Turn the key to the ON position, but do not start the engine. Click the "Open" button at the top left of the screen, and navigate to the location where you saved the tune file. Highlight the tune file, and click "Open".

STEP 4)
Resync the RTD interface.
Click "Help" and select "Resync Interface" from the dropdown menu. Allow for resync process to complete as indicated by "Resync Completed".

STEP 5)
License the file and vehicle.
Once the file is opened, click the "Write Vehicle" button. Once prompted, click the "See License Options". Select the bubble next to the word "Specific" then click "Ok". This is the process that you will use the HP Credits that were loaded to your device - allow for process to complete.

STEP 6)
Write the file to the vehicle.
Once prompted, the Vehicle Writer pop-up, select "WRITE ENTIRE" from the dropdown menu. Allow for the write process to complete, as indicated by a full green bar and a "Write Completed" message.

***NOTE: FAILING TO SELECT "WRITE ENTIRE" MAY RESULT IN AN ISSUE WITH WRITING THE FILE***

THINGS NEEDED
- RTD Flasher Program

STEP 1) Download TDN app

STEP 2) Create account

STEP 3) Connect device to unit

STEP 4) Apply invite code received via email

STEP 5) Read stock file

STEP 6) WKP will enable tune within 24 hours

STEP 7) Login

STEP 8) Connect

STEP 9) Select tune

STEP 10) Flash