- Maverick X3 - All years & models
- Rivet Nuts - QTY 50
- M6 Bolts - QTY 50
- M6 Washers - QTY 50
- Installation Guide - QTY 1
- Rivet Nuts - QTY 75
- M6 Bolts - QTY 75
- M6 Washers - QTY 75
- Installation Guide - QTY 1
- USPS Package: Priority Mail Small Flat Rate Box
- Box Dimensions: 12x10x1
- Weight: 1.5-2.5 lbs.
Install was easy but rivnuts didn’t hold up after removing the plates twice they spun in the holes just by hand tightening and loosening them.
Very useful product. Instructions are fairly good but staff was quick to answer any questions and their advice was spot on. I love the ability to drop the skid plates as wanted or needed.
It was easy for me to install just a little time-consuming. Definitely worth the hassle though makes oil changes much easier. For the price you pay for the kit the rivnuts should be stainless as well. This kit has about $25 worth of parts and they turn around and charge you 120. Definitely a rip off just go source the parts yourself.
Straight forward procedure, somewhat time consuming, but the result is worth it.
QUESTIONS & ANSWERSAsk a Question
What happens if I drill too big of a hole?
As long as you use the 25/64" drill bit, that is the same exact size as the riv nut, you should be fine. If you let the drill bit walk around in the hole to expand it, only then will it bore the hole bigger. If this is the case you will need to find a big enough washer to help cover the hole and insert the riv nut.
Can I use this kit on a Defender XMR HD10 and does it come with the rivet gun Do you ship to Canada
This kit is only intended for the Maverick X3. A rivet gun is NOT included. We ship to Canada as well. More shipping information can be found here.
Do you make a rivet to bolt kit for the Maverick trail?
We don't yet. We only provide them for the X3 as of now.
how long are the M6 bolts?
Sorry, that information is not yet available on our website or Installation Guide. Feel free to check back later.
I don't have a riv nut tool do you have an idea of one that works best with your kit I am replacing skid plate in a 2017 can am x3
We like this one here.
Any special tool required to install the zerts
A rivnut tool is required.
Does the kit do the side skirts that over lap the skid plates?
If those overlapping plastics hold the skid plate yes sir.
Do you have a kit for the Can Am Max? If so what is the price?
Make sure to like and follow our facebook page, also creat an acount and sing up for the email list. We are about to release the max kit. We will be upgrading all hardare to A4 stainless which is marine gradre stainless. Retail I believe will be set at $242.99. It will require 75 of each fastner. Quite a large qty kit. We are also wokring on inlcuding the drill bit and rivnut tool as we speak.
Does the install or crimping tool come with the kit?
Hey Darin, No sir the tool is not included in the kit.
What size hole is needed for the Rivet Nut and is a Rivet Nut installation tool required. The instruction sheet makes no mention of the tool or if additional steps are required.
The instructions have been updated. Please click here and then click on "Installation Guide".