- Outlander 570 (2019)
- Outlander 650 (2018-2019)
- Outlander 1000 (2018-2019)
- Renegade 1000 (2019-2021)
*Will only work on models with Bosch ECU utilizing drive by wire throttle.
- Power Vision 3 Controller - QTY 1
- Installation Guide - QTY 1
- USPS Package: Priority Mail Padded Flat Rate Envelope
- Box Dimensions: 14x10
- Weight: 5 lbs.
I tried using this on my 2020 850 xmr outlander and it reads the bike and what its hooked up to but always says not paired. am I doing something wrong?
QUESTIONS & ANSWERSAsk a Question
Hello, will this fit my 2018 can am outlander 1000 xmr?
Hi, this device fits 18-21 Outlander so long as it drives by wire. If I'm not mistaken the XMR drives by cable, and will not fit this PV3 so you will need to verify if your unit is drive by wire or not.
Will this work on my 2020 can am outlander 850 xt
Hello, this Power Vision 3 (part #PV3-25-10) will work on the 2019-21 Outlander/Renegade with DBW (Drive By Wire)
Hey i got a 2016 can am outlander 850 xt will this tuner still work?
If your unit has an electronic throttle, or is "drive by wire", then this will work on your unit.
Can I use this PV3-25-10 programer to dyno my 2020 can am renegade xmr 1000 although the box says Outlander ? Please advise
Yes, this will work on your Renegade as well.
Will this work on my 2021 outlander xmr 1000?
Yes, it will work with that unit.
I have purchased a PV3 from Denali Performance, and the guy assured me it would work with my 2021 Can am Outlander 650 XT. now they are not responding to my emails. Can you let me know if the Power Vision 3 is compatible with my machine. When I connect it does not recognize the machine. I can't flash or do anything when connected. Thanks in advance!
Hi, I went to DynoJet's website to select your machine and see which device is compatible with it but for the 2021 Can Am Outlander it is only giving me a selection of the 1000. You could try to call them at 1-800-992-4993 and see if your machine is compatible with their PV3 for outlander/renegade.
Does this work for a 2020 can am outlander 570
No, it looks like you'd have to use the Power Commander V for your unit.
greetings, do you sell custom tunes for renegade 1000 with power vision 3?
Yes we do, you purshcase the tune from us here: https://www.warrantykillerperformance.com/collections/warranty-killer-performance/products/can-am-renegade-ecu-reflash?_pos=1&_sid=58cd45664&_ss=r
We are redoing our tuning portion of the website right now so that is how we are selling our tunes for the time being.
Will this work for a 2020 Outlander 850 xt?
Hello, yes this will work for the 2020 Outlander 850 XT
Will this work on my 2019 can Am outlander 570xt. Exhaust is too hot, need to riches her up and get rid off any speed limiters it might have.
No sir, they don't make a Power Vision compatible with your model bike yet. You will need to take a look at the Power Commanders.
Will the PV3 work on a2020 outlander XMR 1000r & will this void my warranty
This will work on your year, make and model bike. It comes with a 1 year warranty.
hey i got a 2020 outlander 850xt would this work
No sir, this vendor does not have a Power Vision that is compatible with your year, make and model. The link below is what they offer for your bike.
Will this work on my 2019 Renegade xmr 1000?
Yes sir this will!
Hi does it removes the speed limiter , on can am outlander 2020 CCX 1000R
We can custom tune the device to remove the speed limiter yes.
Hi I have 2019 xmr 1000, will this work on any 19 model? Does the fuel mapping work for any brand exhaust? Also have a foam air filter will that work with it? Lastly is there seperate tunes for all three (sport work performance) throttle modes? Thank you
Hey Eric, yes it will.
yes the fuel mapping will work for any airfilter and exhaust.
The VE of the engine does not change enough from air filter and exhuast for the calibrations to be changed.
The way the ECU logic monitors via the sensors on the unit will adjust fuel.
yes all the modes will stil work propely.
If you wish to have custom tuning please email us as we offer that as well.
Hi I have 2019 can am outlander 1000R XMR the ECU it’s black the throttle it’s electric Do you supported my outlander
Yes sir we do on power vision as well as map tuner.
I've got a 2019 can am outlander xmr 850, will the programmer work on this model.
Hey peter, built after October 2019 would be T3. Easy way too tell is remove driver side panel the ecu is bolted to the side of the air box its either silver continental ECU or black Bosch T3. Let us know which one you have sir. Black Bosch ECU is the T3 which works wiht power vision.